NICE-POWER SPS3010-2KD Industrial
Automation Testing Power Supply Unit
30V 10A 300W×2 Dual Output
The NICE-POWER SPS3010-2KD is a Dual Output Power Supply Unit designed for Industrial Automation Testing, control circuit evaluation, and adjustable DC power testing. With two independent 0-30V 0-10A outputs, this DC Power Supply provides flexible power configuration for testing industrial control circuits, automation components, and related electronic systems within the rated output range.
The SPS3010-2KD supports One-Key Series Mode and One-Key Parallel Mode for different Industrial Automation Testing requirements. Series Mode provides up to 0-60V at 0-10A, while Parallel Mode provides up to 0-30V at 0-20A. The dedicated Series-Parallel Output Port simplifies configuration without complicated external wiring, providing flexible output options for different industrial testing setups.
Key Features
Dual Output for Industrial Control Circuit Testing
The SPS3010-2KD provides two independent DC outputs, with each output supporting 0-30V and 0-10A. This Dual Output configuration allows engineers and technicians to supply separate voltage and current conditions to different sections of an industrial automation test setup, such as control circuits and associated electronic devices.
Adjustable 30V 10A Output
Each independent output provides an adjustable 0-30V voltage range and up to 0-10A current. This allows the Power Supply Unit to provide controlled DC input conditions for Industrial Automation Testing, where different control circuits and electronic components may require different voltage and current settings.
One-Key Series Mode for Higher Voltage Testing
The One-Key Series Mode combines the two outputs to provide up to 0-60V at 0-10A. This configuration can be used when an industrial automation test circuit requires a higher DC voltage than a single output can provide, within the specified Series Mode operating range.
One-Key Parallel Mode for Higher Current Testing
The One-Key Parallel Mode combines the outputs to provide up to 0-30V and 0-20A. This higher-current configuration can be used for Industrial Automation Testing applications where the test circuit requires greater available current within the rated Parallel Mode range.
Precision Encoder Adjustment
The SPS3010-2KD uses precision encoder adjustment for voltage and current settings. This provides controlled adjustment of the Power Supply Unit during Industrial Automation Testing, allowing users to establish specific DC voltage and current conditions for different test procedures.
Dedicated Series-Parallel Output Port
The dedicated Series-Parallel Output Port simplifies connections when switching between independent, series, and parallel output configurations. This avoids complicated external wiring and provides a practical way to configure the Dual Output Power Supply Unit for different industrial testing requirements.
Negative-Voltage to Positive-Voltage Output Mode
The SPS3010-2KD supports negative-voltage to positive-voltage output mode. This capability can be used for Industrial Automation Testing setups that require bipolar power arrangements or positive and negative voltage relationships for associated control circuits.
Applications
Industrial Control Circuit Testing
The adjustable 0-30V 0-10A outputs can be used to establish controlled DC power conditions for industrial control circuits. The Dual Output configuration allows separate power settings for different parts of a control system during bench testing.
Automation Component Testing
The SPS3010-2KD can provide adjustable DC power for testing electronic components and control devices used in industrial automation systems. Independent outputs allow users to configure different voltage and current conditions within the rated specifications.
High-Current Automation Equipment Testing
When an Industrial Automation Testing setup requires higher available current, Parallel Mode provides up to 0-30V and 0-20A. This configuration can be used for test circuits requiring greater current capacity within the specified Parallel Mode operating range.
Higher-Voltage Control System Testing
For industrial control circuits requiring a higher DC test voltage, Series Mode provides up to 0-60V at 0-10A. This configuration extends the available voltage range compared with a single independent output and can be used for test requirements within the Series Mode specifications.
Quality Check and Terms of Service
The SPS-2KD series is inspected before shipment to help ensure that the DC Power Supply and included accessories are in good condition.
Package Includes:
-
DC Power Supply ×1
-
Output Power Cord ×1
-
Input Power Cord ×1
-
User Manual ×1
-
Warranty Card ×1
Quality Assurance:
-
Passed CE and FCC Certification.
-
All DC power supplies and accessories are inspected before shipment.
-
Contact us with any questions, and our customer support team will respond within 24 hours.
Technical Specifications
| Parameter |
Specification |
| Model |
SPS3010-2KD |
| Product Type |
Dual Output DC Bench Power Supply |
| Independent Output |
0-30V, 0-10A, 300W ×2 |
| Series Output |
0-60V, 0-10A, 600W |
| Parallel Output |
0-30V, 0-20A, 600W |
| Load Regulation Voltage |
≤0.3%+10mV |
| Load Regulation Current |
≤0.1%+2.5mA |
| Line Regulation Voltage |
≤0.01%+2.5mV |
| Line Regulation Current |
≤0.1%+2.5mA |
| Setting Resolution Voltage |
10mV |
| Setting Resolution Current |
1mA |
| Readback Resolution Voltage |
10mV |
| Readback Resolution Current |
1mA |
| Setting Accuracy Voltage |
≤0.05%+10mV |
| Setting Accuracy Current |
≤0.01%+10mA |
| Readback Accuracy Voltage |
≤0.05%+10mV |
| Readback Accuracy Current |
≤0.01%+10mA |
| Ripple Voltage, Independent |
≤180mVp-p, ≤15mVrms |
| Ripple Voltage, Series/Parallel |
≤200mVp-p, ≤20mVrms |
| Ripple Current, Independent |
≤15mArms |
| Ripple Current, Series/Parallel |
≤30mVrms |
| Rise Time, No Load |
≤200mS |
| Rise Time, Full Load |
≤300mS |
| Fall Time, No Load |
≤20S |
| Fall Time, Full Load |
≤300mS |
| Dynamic Response |
≤200mS |
| Programming Response |
≤200mS |
| Sense Compensation |
None |
| Efficiency |
≥85% |
| Power Factor |
0.68 |
| Maximum Input Current |
110V/8A, 220V/5A |
| Rated Temperature |
0℃-40℃ |
| Product Size |
Approx. 27.5 × 12 × 15cm |
| Net Weight |
Approx. 2.36KG |
| Package Size |
Approx. 37.5 × 18.5 × 22cm |
| Package Weight |
Approx. 2.9KG |
| Carton Quantity |
6 pcs/carton |
Why Choose NICE-POWER SPS3010-2KD?
The NICE-POWER SPS3010-2KD combines two independent 0-30V 0-10A outputs with Series and Parallel operating modes, providing a flexible Dual Output Power Supply Unit for Industrial Automation Testing. Independent Mode supports separate adjustable DC outputs, Series Mode extends the available voltage to 0-60V, and Parallel Mode increases the available current to 0-20A.
With precision encoder adjustment, a dedicated Series-Parallel Output Port, and negative-voltage to positive-voltage output mode, the SPS3010-2KD provides a practical DC Power Supply solution for industrial control circuit testing, automation component testing, higher-current testing, and higher-voltage DC testing within its specified operating ranges.
