Network Switch Power Board Testing with
NICE-POWER SPS605-2KD DC Bench Supply 0-60V
0-5A 300W×2
Dual Channel DC Power Supply for Network Switch Power Board Testing
The NICE-POWER SPS605-2KD is a Dual Channel DC Power Supply designed for Network Switch Power Board Testing, power circuit evaluation, and adjustable DC power applications. With two independent 0-60V 0-5A outputs, each rated at 300W, this DC Bench Power Supply provides flexible power configurations for testing different sections of network switch power boards, DC power circuits, and related electronic modules within the rated output range.
The SPS605-2KD supports One-Key Series Mode and One-Key Parallel Mode for different power board testing requirements. Series Mode combines the two channels to provide up to 0-120V at 0-5A, while Parallel Mode provides up to 0-60V at 0-10A. The dedicated Series-Parallel Output Port simplifies output configuration without complicated external wiring, allowing users to switch between different output modes conveniently.
Equipped with Encoder Adjustment, a dedicated Series-Parallel Output Port, and negative voltage-to-zero-to-positive voltage output mode, the SPS605-2KD provides flexible DC power configurations for network switch power board development, power circuit testing, and laboratory applications.
Key Features
Dual Independent Outputs for Network Switch Power Board Testing
The SPS605-2KD provides two independent DC outputs, each supporting 0-60V, 0-5A, and 300W. This Two Channel Power Supply configuration allows engineers to establish separate DC power conditions for different sections of a network switch power board.
During Network Switch Power Board Testing, users can independently adjust the two output channels according to the power requirements of compatible circuits and electronic modules. This dual output configuration provides a convenient DC power solution for laboratory testing and power board development.
Adjustable 0-60V 0-5A DC Power Output
Each independent output provides an adjustable voltage range of 0-60V and a maximum current of 0-5A, with a rated power of 300W per channel.
This adjustable DC output capability allows users to establish different power conditions for network switch power board circuits and related electronic modules. With 10mV voltage setting resolution and 1mA current setting resolution, the SPS605-2KD supports detailed output adjustments during power circuit testing and development.
One-Key Series Mode for Higher Voltage Testing
The One-Key Series Mode combines the two output channels to provide up to 0-120V at 0-5A, with a combined rated power of 600W.
This configuration extends the available voltage range compared with a single independent channel and is suitable for compatible network switch power circuits or electronic modules requiring higher DC voltage within the specified Series Mode operating range.
One-Key Parallel Mode for Higher Current Testing
The One-Key Parallel Mode combines the two output channels to provide up to 0-60V and 0-10A, with a combined rated power of 600W.
This configuration increases the available output current and can be used for compatible power board circuits and electronic modules requiring higher DC current within the specified Parallel Mode operating range.
Encoder Adjustment for Precise Output Setting
The SPS605-2KD uses Encoder Adjustment for voltage and current settings, allowing users to adjust output parameters according to different power board testing requirements.
With 10mV voltage setting resolution and 1mA current setting resolution, the power supply provides detailed adjustment capability for laboratory DC power applications.
Dedicated Series-Parallel Output Port
The dedicated Series-Parallel Output Port simplifies the connection process when using Series and Parallel output configurations.
This design avoids complicated external wiring and provides a convenient way to switch between independent, series, and parallel output modes for different network switch power board testing requirements.
Negative Voltage-to-Zero-to-Positive Voltage Output Mode
The SPS605-2KD supports negative voltage-to-zero-to-positive voltage output mode, providing additional output flexibility for compatible electronic circuits that require different voltage polarities.
This function can be useful when testing and developing electronic power circuits that require positive, zero, or negative voltage conditions.
USB 5V 2A Power Output
In addition to its two independent DC output channels, the SPS605-2KD provides a USB 5V 2A output for powering compatible USB devices and accessories.
This additional USB power output offers a convenient auxiliary power source for compatible devices used on the workbench.
Applications
Network Switch Power Board Testing
The SPS605-2KD provides adjustable DC power for testing compatible network switch power board circuits. Its two independent output channels allow users to establish separate DC power conditions for different circuit sections during laboratory testing and development.
Network Switch Power Circuit Evaluation
During network switch power circuit evaluation, engineers may need to adjust the supplied DC voltage and current according to the requirements of the circuit under test. The SPS605-2KD provides two independently adjustable outputs for establishing different power conditions within its rated specifications.
Multi-Channel Power Board Testing
For electronic boards containing different power sections, the dual independent outputs can supply separate DC power to compatible circuits. Users can adjust the voltage and current of each channel independently to accommodate different testing requirements.
Higher-Voltage Power Circuit Testing
For compatible power board circuits requiring a higher DC supply voltage, Series Mode combines the two channels to provide up to 0-120V at 0-5A and 600W. This configuration expands the available voltage range for laboratory power circuit testing.
Higher-Current Electronic Module Testing
When a compatible electronic module requires a higher DC output current, Parallel Mode combines the two channels to provide up to 0-60V at 0-10A and 600W. This configuration is suitable for power board circuits requiring increased current within the rated operating range.
Electronic Circuit Development and Verification
The adjustable dual outputs and Encoder Adjustment make the SPS605-2KD suitable for electronic circuit development and laboratory verification. Engineers can configure different DC power conditions for compatible electronic circuits during development and testing.
Positive and Negative Voltage Circuit Testing
The negative voltage-to-zero-to-positive voltage output mode provides additional flexibility for compatible electronic circuits requiring different voltage polarities during development and testing.
Quality Check and Terms of Service
The SPS-2KD series is inspected before shipment to help ensure that the DC Power Supply and included accessories are in good condition.
Package Includes:
-
DC Power Supply × 1
-
Output Power Cord × 1
-
Input Power Cord × 1
-
User Manual × 1
-
Warranty Card × 1
Quality Assurance:
-
Passed CE and FCC Certification.
-
All DC power supplies and accessories are inspected before shipment.
-
Contact us with any questions, and our customer support team will respond within 24 hours.
Technical Specifications
| Parameter |
Specification |
| Model |
SPS605-2KD |
| Product Type |
Two Channel DC Bench Power Supply |
| Independent Output |
0-60V, 0-5A, 300W × 2 |
| Series Output |
0-120V, 0-5A, 600W |
| Parallel Output |
0-60V, 0-10A, 600W |
| USB Output |
5V, 2A |
| Load Regulation Voltage |
≤0.3% + 10mV |
| Load Regulation Current |
≤0.1% + 2.5mA |
| Line Regulation Voltage |
≤0.01% + 2.5mV |
| Line Regulation Current |
≤0.1% + 2.5mA |
| Setting Resolution Voltage |
10mV |
| Setting Resolution Current |
1mA |
| Readback Resolution Voltage |
10mV |
| Readback Resolution Current |
1mA |
| Setting Accuracy Voltage |
≤0.01% + 15mV |
| Setting Accuracy Current |
≤0.01% + 10mA |
| Readback Accuracy Voltage |
≤0.01% + 15mV |
| Readback Accuracy Current |
≤0.01% + 10mA |
| Ripple Voltage Independent Mode |
≤200mVp-p, ≤25mVrms |
| Ripple Voltage Series/Parallel Mode |
≤300mVp-p, ≤40mVrms |
| Ripple Current Independent Mode |
≤20mArms |
| Ripple Current Series/Parallel Mode |
≤35mVrms |
| Rise Time (No Load) |
≤200ms |
| Rise Time (Full Load) |
≤300ms |
| Fall Time (No Load) |
≤20s |
| Fall Time (Full Load) |
≤300ms |
| Dynamic Response Time |
≤200ms |
| Efficiency |
≥85% |
| Input Voltage / Current |
AC 110V / 8A, AC 220V / 5A |
| Rated Operating Temperature |
0°C-40°C |
| Product Dimensions |
Approx. 27.5 × 12 × 15cm |
| Net Weight |
Approx. 2.36kg |
| Package Dimensions |
Approx. 37.5 × 18.5 × 22cm |
| Package Weight |
Approx. 2.9kg |
| Carton Quantity |
6 pcs/carton |
Why Choose NICE-POWER SPS605-2KD?
The NICE-POWER SPS605-2KD combines two independent 0-60V 0-5A outputs with flexible Series and Parallel operating modes, providing a practical Two Channel DC Bench Power Supply solution for Network Switch Power Board Testing.
Independent Mode provides two separate adjustable DC outputs, Series Mode extends the available voltage to 0-120V, and Parallel Mode increases the available current to 0-10A. These configurations allow users to select suitable DC power conditions for different compatible electronic circuits and power board testing requirements.
With Encoder Adjustment, a dedicated Series-Parallel Output Port, and negative voltage-to-zero-to-positive voltage output mode, the SPS605-2KD provides a flexible DC power solution for network switch power board testing, power circuit evaluation, electronic module development, and laboratory DC power applications within its specified operating ranges.
