Click the link above to get the full user guide for this product.
Motor Controller Electronics Evaluation with
NICE-POWER R-SPS10010 Regulated DC Supply
100V 10A 1000W
Key Features
Adjustable 0–100V DC Output for Motor Controller Electronics
The NICE-POWER R-SPS10010 Regulated DC Supply provides an adjustable output voltage from 0 to 100V, a maximum output current of 10A, and rated output power of 1000W. During Motor Controller Electronics Evaluation, engineers can set the DC supply voltage according to the rated input requirements of a compatible controller board or electronic control module. This provides a configurable DC source for initial power-up checks and control electronics development.
1000W Rated Output for Controller Board Bench Testing
With 1000W of rated output power, the R-SPS10010 can power compatible motor controller electronics within the supply's voltage, current, and power limits. It can support bench work on controller boards, gate-driver control circuits, and related low-power control electronics when their input requirements are compatible with the supply. The power supply does not directly drive or control a motor; the connected device must be suitable for the source's output range.
CV/CC Operation for Controlled Electronics Powering
The power supply supports constant-voltage (CV) and constant-current (CC) operation, with automatic switching according to output and load conditions. CV operation is suitable for applying the specified DC input voltage to compatible control electronics. CC operation can limit output current under applicable conditions, which can be useful during initial power-up or when investigating unexpected current demand. These modes do not replace dedicated overcurrent protection or motor-controller safety circuitry.
Voltage, Current, and Power Display for Supply Monitoring
The front-panel display shows output voltage and current, with power also displayed. During controller board evaluation, engineers can monitor the supply's output readings while powering the connected electronics. Changes in source-side current or power may help identify conditions that require further inspection. The readings do not directly measure PWM signals, gate-drive waveforms, motor phase current, or controller response.
Front-Panel Adjustment and Output ON/OFF Control
The encoder knob allows manual adjustment of the output settings, while the output ON/OFF control provides convenient control of the DC output during bench testing. Engineers can prepare the required supply voltage before powering a controller board and disable the output before modifying connections. The standard R-SPS10010 uses manual front-panel adjustment and should not be represented as automatically executing a controller test sequence.
Front and Rear Output Terminals for Flexible Bench Setup
The R-SPS10010 provides front and rear output terminals for different bench connection arrangements. The front output terminal is intended for output currents below 5A, while the rear terminals can be used for full-power output with suitable wiring and connections. Select the terminal arrangement according to the controller's expected input current and the manufacturer's connection instructions.
Applications
Motor Controller Control Board Power-Up
Supply DC power to compatible motor controller control boards during assembly, inspection, and initial power-up. Engineers can set the input voltage according to the board's rated requirements and monitor the supply's output readings while checking basic power-up behavior. Confirm the board's input voltage, polarity, grounding, and expected current before applying power.
Gate Driver and Control Circuit Evaluation
Power compatible gate-driver control electronics and associated interface circuits during laboratory development. The R-SPS10010 can provide the required DC supply to suitable control circuitry while engineers use separate instruments to inspect logic signals and gate-drive waveforms. The power supply itself does not generate PWM signals or measure switching waveforms.
Motor Controller Interface Board Testing
Provide DC power to compatible interface boards that connect a motor controller with sensors, command inputs, or a higher-level control system. The adjustable output supports board-level power checks during development and troubleshooting. Signal levels, communication behavior, and interface timing must be evaluated using appropriate measurement equipment.
Controller Power Input Troubleshooting
Use the regulated DC supply when investigating power-related issues in a compatible motor controller board, such as unexpected source current or failure to power up. Apply the specified input voltage and observe the supply's current and power readings while inspecting wiring and the input stage. These observations can guide further troubleshooting but cannot independently identify a faulty component.
Motor Control Electronics Prototype Evaluation
Supply DC power to compatible motor control electronics prototypes during design revisions and laboratory evaluation. The adjustable output allows engineers to apply different permitted supply-voltage settings according to the prototype's specifications. Tests involving motor operation, drive-stage performance, switching behavior, or motor current require suitable drive hardware and separate measurement instruments.
Quality Check and Terms of Service:
-
Package Includes: DC Power Supply × 1, Output Power Cord × 1, Input Power Cord × 1, User Manual × 1, Warranty Card × 1.
-
Certifications: Has passed CE & FCC Certification.
-
Quality Inspection: All DC power supplies and accessories are inspected before shipment to ensure good quality.
-
Customer Support: Contact us with any questions, and we'll respond within 24 hours.
Technical Specifications
| Parameter |
Specification |
| Model |
R-SPS10010 / R-SPS10010-R |
| Product Type |
Regulated DC Power Supply |
| Rated Output Power |
1000W |
| Output Voltage Range |
0–100V |
| Output Current Range |
0–10A |
| Operating Mode |
Constant Voltage (CV) / Constant Current (CC) |
| Load Regulation (Voltage) |
≤0.1% + 10mV |
| Load Regulation (Current) |
≤0.1% + 2.5mA |
| Line Regulation (Voltage) |
≤0.01% + 2.5mV |
| Line Regulation (Current) |
≤0.1% + 2.5mA |
| Voltage Setting Resolution |
10mV |
| Current Setting Resolution |
10mA |
| Voltage Readback Resolution |
10mV |
| Current Readback Resolution |
10mA |
| Voltage Setting Accuracy |
≤0.05% + 10mV |
| Current Setting Accuracy |
≤0.01% + 10mA |
| Voltage Readback Accuracy |
≤0.05% + 10mV |
| Current Readback Accuracy |
≤0.01% + 10mA |
| Voltage Ripple (Peak-to-Peak) |
≤400mVp-p |
| Voltage Ripple (RMS) |
≤60mVrms |
| Current Ripple |
≤20mArms (20Hz–20MHz) |
| Rise Time (No Load) |
≤150ms |
| Rise Time (Full Load) |
≤200ms |
| Fall Time (No Load) |
≤15s |
| Fall Time (Full Load) |
≤50ms |
| Dynamic Response Time |
≤20ms |
| Conversion Efficiency |
≥85% |
| Display |
Four-digit voltage/current display with power display |
| Output Control |
Output ON/OFF |
| Adjustment Method |
Encoder knob adjustment |
| Output Terminals |
Front and rear output terminals |
| Front Output Terminal Use |
For output currents below 5A |
| Rear Output Terminal Use |
Available for full-power output with suitable wiring and connections |
| Communication Interfaces |
Optional; verify the selected model and configuration |
| Operating Temperature |
0°C–40°C |
| Product Dimensions |
Approx. 26.5 × 18.5 × 8cm |
| Net Weight |
Approx. 2.8kg |
Why Choose NICE-POWER R-SPS10010 for Motor Controller Electronics Evaluation?
The NICE-POWER R-SPS10010 Regulated DC Supply combines an adjustable 0–100V output, 10A maximum output current, and 1000W rated output power for compatible motor controller electronics and laboratory development tasks. Its CV/CC operation, front-panel adjustment, output ON/OFF control, and voltage, current, and power display support controlled DC power delivery during controller board power-up and troubleshooting.
For engineers evaluating motor controller boards, gate-driver control electronics, and interface circuits, this bench supply provides an adjustable source for board-level power checks. It supplies DC power rather than generating control signals or analyzing motor-drive waveforms, so dedicated instruments are required for signal timing, switching behavior, motor current, and drive-stage performance measurements.
Model Configuration Note: R-SPS10010 is the standard manual-adjustment version. R-SPS10010-R is the programmable version. USB, RS232, and RS485 communication interfaces are optional; confirm the specific model configuration before ordering.
