Click the link above to get the full user guide for this product.
LED Lighting Testing with KUAIQU
R-SPS1530S 15V 30A 450W CC CV
Adjustable DC Power Supply
The KUAIQU R-SPS1530S is a 15V 30A 450W CC CV Adjustable DC Power Supply designed for compatible LED Lighting Testing applications. With a 0–15V adjustable voltage range, up to 30A current output, and 450W rated power, it provides controlled DC power for LED lighting devices, LED modules, and other compatible low-voltage lighting loads within the rated operating range. The four-digit display provides voltage, current, and power readback, while precision encoder adjustment, Output ON/OFF control, OCP, OVP, and M1-M3 memory functions support controlled and repeatable LED testing workflows.
Key Features
15V 30A 450W CC CV Adjustable DC Power Supply
The R-SPS1530S provides a 0–15V adjustable voltage range, 0–30A current range, and 450W rated output power. Its CC CV operation allows users to work with controlled voltage and current conditions when testing compatible LED lighting devices and LED-related DC loads.
Adjustable Output for Different LED Test Conditions
LED lighting products can require different operating conditions during development and verification. The adjustable voltage and current output allows users to configure suitable DC power conditions within the 0–15V, 0–30A, and 450W limits of the R-SPS1530S.
Four-Digit Voltage, Current, and Power Display
The four-digit display provides direct readback of voltage, current, and power. During LED Lighting Testing, users can observe the electrical output supplied to the connected lighting load while adjusting the test conditions.
Precision Encoder Adjustment
The precision encoder provides controlled adjustment of voltage and current settings. This is useful when LED Lighting Testing requires gradual changes to the supplied electrical conditions rather than simply applying a fixed output.
OCP and OVP Protection
The R-SPS1530S provides Over Current Protection and Over Voltage Protection functions. These protection functions provide additional protection for compatible LED test setups when excessive current or voltage conditions occur.
Output ON/OFF Control
The Output ON/OFF function allows users to apply or remove DC output without having to repeatedly change the configured voltage and current settings. This can simplify power cycling during LED Lighting Testing.
M1-M3 Memory for Repeated LED Tests
The R-SPS1530S provides three memory groups, M1-M3, for storing frequently used settings. When multiple LED products or repeated test procedures require the same power conditions, stored settings can help reduce repeated manual adjustment.
Panel Lock for Consistent Test Settings
The Panel Lock Button helps prevent unintended changes to the configured power supply settings. This can be useful when an LED test setup needs to maintain the same voltage and current conditions throughout a test procedure.
Front and Rear Output Connections
The R-SPS1530S provides output ports on both the front and rear panels. The product data specifies that the front output is suitable for loads below 5A, while the rear output can be used at full power, providing different connection options for LED test benches and higher-current lighting loads.
USB and Optional RS232 / RS485 Interfaces
The R-SPS-S series provides a standard USB port, with RS232 and RS485 available as optional interfaces. These interfaces provide additional connection options for compatible LED Lighting Testing setups when the corresponding interface configuration is selected.
Applications
LED Lighting Testing
The R-SPS1530S provides adjustable DC power for compatible LED lighting devices and LED test setups. Users can configure voltage and current within the 0–15V, 0–30A, and 450W rated output range while monitoring voltage, current, and power on the four-digit display.
LED Module Testing
The CC CV Adjustable DC Power Supply can provide controlled DC power for compatible LED modules during testing. Adjustable voltage and current settings allow users to evaluate the module under different electrical supply conditions within the rated range.
LED Lamp Testing
The R-SPS1530S can be used as an adjustable DC power source for compatible low-voltage LED lamps. Users can configure the required output conditions and observe the displayed voltage, current, and power during the test.
LED Lighting Prototype Evaluation
During LED lighting development, different prototypes may require different supply conditions. The adjustable 0–15V output allows users to change the supplied voltage and current according to the requirements of compatible LED prototypes.
LED Power Consumption Testing
The four-digit display provides voltage, current, and power readback, allowing users to observe the electrical output conditions while testing compatible LED lighting loads. This makes the R-SPS1530S useful when checking power-related characteristics within the limits of the connected LED device and power supply.
LED Driver and Lighting System Testing
The R-SPS1530S can provide adjustable DC power for compatible LED driver and lighting system test setups where the required input power falls within its 0–15V, 0–30A, and 450W output specifications.
Repeated LED Production Testing
For repeated testing procedures using the same voltage and current settings, the M1-M3 memory functions can store three groups of commonly used settings. This can reduce repeated manual adjustment when testing multiple compatible LED lighting units.
LED Lighting Quality Verification
The adjustable output and four-digit voltage, current, and power display can support electrical verification of compatible LED lighting products. Users can change the power supply conditions and monitor the resulting output parameters during bench testing.
High Current LED Load Testing
For compatible LED lighting loads that require higher current, the R-SPS1530S provides up to 30A output and 450W rated power. The actual connected LED load must remain within the power supply's voltage, current, and power specifications.
Quality Check and Terms of Service:
-
Package includes: DC Power Supply *1, Output Power Cord *1, Input Power Cord *1, User Manual *1, Warranty Card *1.
-
Has passed CE & FCC Certification.
-
All DC power supplies and accessories are inspected before shipment to ensure good quality.
-
Customer support: Contact us with any questions, and we'll respond within 24 hours.
Technical Specifications
| Parameter |
Specification |
| Product Model |
R-SPS1530S |
| Series |
R-SPS-S High Power Pro Series |
| Rated Voltage |
15V |
| Adjustable Voltage Range |
0-15V |
| Rated Current |
30A |
| Adjustable Current Range |
0-30A |
| Rated Output Power |
450W |
| Operating Temperature |
0-40°C |
| Operating Mode |
CC / CV |
| Display |
Four-digit Voltage / Current / Power Display |
| Output Control |
Output ON/OFF |
| Panel Lock |
Yes |
| Memory |
M1-M3, 3 Groups |
| OCP Function |
Yes |
| OVP Function |
Yes |
| Encoder Adjustment |
Precision Encoder Adjustment |
| Buzzer |
Can be set to mute |
| USB Port |
Standard USB Port |
| RS232 / RS485 |
Optional |
| Output Ports |
Front + Rear Dual Output Ports |
| Front Output |
Below 5A |
| Rear Output |
Can be used at full power |
| Voltage Load Regulation |
≤0.1% + 10mV |
| Current Load Regulation |
≤0.1% + 2.5mA |
| Voltage Line Regulation |
≤0.01% + 2.5mV |
| Current Line Regulation |
≤0.1% + 2.5mA |
| Voltage Setting Resolution |
10mV |
| Current Setting Resolution |
10mA |
| Voltage Readback Resolution |
10mV |
| Current Readback Resolution |
10mA |
| Voltage Setting Accuracy |
≤0.05% + 10mV |
| Current Setting Accuracy |
≤0.01% + 10mA |
| Voltage Readback Accuracy |
≤0.05% + 10mV |
| Current Readback Accuracy |
≤0.01% + 10mA |
| Voltage Ripple |
≤300 mVp-p / ≤30 mVrms |
| Current Ripple |
≤20 mArms |
| Ripple Test Frequency |
20Hz-20MHz |
| Rise Time, No Load |
≤150ms |
| Rise Time, Full Load |
≤200ms |
| Fall Time, No Load |
≤15s |
| Fall Time, Full Load |
≤50ms |
| Dynamic Response |
≤20ms |
| Efficiency |
≥85% |
| Size |
About 26.5 × 19 × 8.5 cm |
| Net Weight |
2.5KG |
| Package Size |
38 × 24.5 × 12.5 cm |
| Package Weight |
3.2KG |
| Carton Quantity |
6pcs / Carton |
The R-SPS1530S-specific specifications above follow the product data you provided, including 0-15V, 0-30A, 450W, ≤300 mVp-p / ≤30 mVrms voltage ripple, and ≤20 mArms current ripple. The series data also specifies the 10mV / 10mA setting and readback resolutions, response times, efficiency, and approximately 26.5 × 19 × 8.5 cm / 2.5KG product size and weight. The current KUAIQU specification page independently lists the same 0-15V, 0-30A, 450W rating for R-SPS1530S.
Why Choose KUAIQU R-SPS1530S?
The KUAIQU R-SPS1530S combines 15V 30A 450W output capability with CC CV adjustable operation for compatible LED Lighting Testing applications. Its adjustable output allows users to establish different DC supply conditions, while the four-digit display provides direct visibility of voltage, current, and power during testing.
For repeated LED testing, the M1-M3 memory functions can store commonly used settings, while Output ON/OFF control makes power cycling more convenient. OCP and OVP provide additional output protection, and the Panel Lock helps prevent unintended setting changes once a test condition has been established.
The combination of 0-15V adjustable output, up to 30A current, 450W rated power, CC CV operation, precision encoder adjustment, digital voltage/current/power readback, and flexible front/rear output connections makes the R-SPS1530S a practical Adjustable DC Power Supply for compatible LED modules, LED lamps, LED lighting prototypes, and other low-voltage LED test loads within its rated specifications.
