Click the link above to get the full user guide for this product.
KUAIQU SPPS-C605 60V 5A 300W DC
Supply Unit with Voltage Current Power
Display for 48V Telecom Testing
The KUAIQU SPPS-C605 is a 60V 5A 300W DC Supply Unit developed for bench testing compatible 48V telecom equipment, communication modules, DC-powered electronic devices, and related equipment used in communication power systems. With a 0-60V adjustable output range, users can establish different DC input conditions for equipment evaluation without changing the physical power source. The Voltage Current Power Display provides direct visibility into the electrical conditions during testing, while the encoder adjustment, CV/CC operation, and Output Control support controlled test procedures from initial power-up through operating checks.
For telecom engineering and maintenance work, a stable adjustable DC source can be used to reproduce different supply conditions, verify equipment startup behavior, observe current consumption, compare operating states, and perform repeated power application tests. The SPPS-C605 is designed as a practical bench DC Supply Unit for these electrical testing tasks within its rated 60V, 5A, and 300W output capability.
Key Features
0-60V Adjustable Output for 48V Telecom Equipment
The SPPS-C605 provides a continuously adjustable DC output from 0 to 60V, with up to 5A current and 300W maximum power. The 0-60V range provides suitable adjustment flexibility for compatible 48V telecom equipment and other DC-powered communication electronics operating within the power supply's rated output range.
Instead of being limited to a single fixed output voltage, technicians can configure the DC Supply Unit according to the input requirements of different equipment under test. This makes the SPPS-C605 suitable for bench evaluation of communication equipment, electronic modules, and related DC-powered assemblies.
Voltage Current Power Display for Electrical Condition Monitoring
The 4-digit digital display provides voltage, current, and power readings during operation. This allows technicians to see the electrical condition of the connected equipment directly from the power supply during 48V Telecom Testing.
Monitoring current and power can also help users compare different operating states of compatible equipment. For example, the displayed values can be observed during startup, normal operation, repeated power cycling, or when the equipment is operating under different configured DC supply conditions.
Encoder Adjustment for Controlled Supply Settings
The dual-knob encoder provides convenient adjustment of voltage and current settings. For telecom equipment testing, this allows users to establish the required DC supply parameters before connecting or powering the equipment under test.
The encoder adjustment is also useful when engineers need to make controlled changes to the supply setting and observe how compatible equipment responds electrically. This supports practical bench procedures where different input conditions need to be checked without replacing the power supply.
CV/CC Automatic Switching for Variable Equipment Loads
The SPPS-C605 supports automatic switching between Constant Voltage and Constant Current operation according to the connected load. This provides flexible DC power for compatible telecom equipment and electronic modules with different electrical load characteristics.
During testing, the operating mode can adapt according to the connected load within the rated output capability of the DC Supply Unit, making the SPPS-C605 suitable for a range of communication electronics and DC-powered equipment evaluation tasks.
Output Control for Controlled Power Application
The independent Output Control allows users to configure the required voltage and current settings before applying power to the equipment under test. This is particularly useful when a telecom device needs to be connected, disconnected, restarted, or tested repeatedly.
Technicians can prepare the desired settings first and then control when DC output is applied. This provides a practical workflow for startup checks, power cycling, equipment replacement, and repeated bench testing.
48V Equipment Startup and Operating Observation
The adjustable output and real-time electrical display allow users to observe equipment behavior from initial power application through normal operation. During a startup check, technicians can monitor the displayed voltage, current, and power while the connected equipment begins operating.
This can provide useful electrical reference data when comparing different equipment units or checking whether the power consumption changes between startup and steady operating conditions.
Power Consumption Observation During Bench Testing
The Voltage Current Power Display allows technicians to observe changes in electrical consumption while compatible telecom equipment is operating. The displayed current and power values can be recorded manually or compared between different test conditions as part of a bench evaluation procedure.
This is useful when checking whether an equipment unit maintains a consistent electrical operating condition or when comparing the power requirements of different compatible devices.
Compact DC Supply Unit for Communication Equipment Workstations
The compact SPPS-C605 fits laboratory benches, electronics workstations, telecom maintenance areas, engineering development benches, and equipment repair environments. Its temperature-controlled fan supports cooling during operation, while the USB 5V/2A output can provide auxiliary power for compatible USB-powered accessories used at the workstation.
Applications
48V Telecom Equipment Input Testing
The SPPS-C605 can provide adjustable DC power for compatible 48V telecom equipment within its 0-60V, 0-5A, and 300W output capability. Technicians can configure the required input voltage and monitor voltage, current, and power while evaluating the equipment's electrical operation.
This is useful for bench-level testing before equipment is integrated into a larger communication power system.
Telecom Equipment Startup Verification
Use the DC Supply Unit to establish the required DC input condition and observe the equipment when power is first applied. The Voltage Current Power Display allows users to monitor the electrical values during startup and compare them with values observed during normal operation.
The Output Control also allows power to be removed and reapplied during repeated startup checks.
48V Communication Module Testing
The SPPS-C605 can provide adjustable DC power to compatible communication modules, electronic assemblies, and other DC-powered modules used within telecom equipment. Users can configure the supply according to the module's rated input requirements and monitor its electrical behavior during operation.
The adjustable 0-60V output also provides flexibility when different compatible modules require different DC input settings.
Telecom Equipment Power Consumption Evaluation
During equipment operation, technicians can observe current and power readings on the display. These values can be compared between startup and steady-state operation or between different compatible equipment units under similar supply conditions.
This makes the SPPS-C605 useful for basic electrical power consumption evaluation during telecom equipment development, maintenance, and bench testing.
DC Input Condition Comparison
Different DC supply conditions can be established using the adjustable output of the SPPS-C605, provided they remain within the equipment and power supply ratings. Engineers can use controlled changes in voltage and current settings to compare the electrical response of compatible telecom equipment.
This approach is useful during engineering evaluation when a device needs to be checked under more than one DC input condition.
Telecom Equipment Power Cycling Checks
The Output Control provides convenient control of DC power application during repeated equipment tests. Technicians can configure the required settings and repeatedly switch the output when performing startup, shutdown, restart, or replacement checks.
This provides a straightforward bench procedure for evaluating compatible equipment through repeated power application.
Communication Equipment Repair and Maintenance
The SPPS-C605 can serve as an adjustable DC Supply Unit on telecom repair and maintenance benches. Technicians can provide controlled DC power to compatible equipment or modules while observing voltage, current, and power during troubleshooting and post-repair verification.
The compact design also makes it suitable for workstations where equipment needs to be powered and checked individually.
Telecom Equipment Development and Engineering Evaluation
During development and engineering evaluation, the SPPS-C605 can provide an adjustable DC source for compatible communication equipment and modules. Engineers can establish the required supply condition, monitor electrical values, and repeat tests using consistent front-panel settings.
The combination of encoder adjustment, digital electrical readings, CV/CC operation, and Output Control provides a practical bench setup for DC power-related evaluation.
Quality Check and Terms of Service
-
Package includes: DC Power Supply *1, Output Power Cord *1, Input Power Cord *1, User Manual *1, Warranty Card *1.
-
Has passed CE & FCC Certification.
-
All DC power supplies and accessories are inspected before shipment to ensure good quality.
-
Customer support: Contact us with any questions, and we'll respond within 24 hours.
Technical Specifications
| Parameter |
Specification |
| Product Type |
DC Supply Unit |
| Model |
SPPS-C605 |
| Rated Voltage |
0-60V |
| Rated Current |
0-5A |
| Rated Power |
300W |
| Display |
4-Digit LED Display |
| Display Parameters |
Voltage / Current / Power |
| Control |
Dual-Knob Encoder Adjustment |
| Operating Mode |
CV/CC Automatic Switching |
| Output Control |
Output ON/OFF Switch |
| USB Output |
5V/2A |
| Rated Operating Temperature |
0-40°C |
| Voltage Ripple |
≤200 mVp-p / ≤20 mVrms |
| Current Ripple |
≤20 mArms |
| Voltage Setting Accuracy |
≤0.01% + 15mV |
| Voltage Readback Accuracy |
≤0.01% + 15mV |
| Current Accuracy |
≤0.01% + 10mA |
| Voltage Setting Resolution |
10mV |
| Voltage Readback Resolution |
10mV |
| Current Setting Resolution |
1mA |
| Current Readback Resolution |
1mA |
| Load Regulation Voltage |
≤0.3% + 10mV |
| Load Regulation Current |
≤0.1% + 2.5mA |
| Line Regulation Voltage |
≤0.01% + 2.5mV |
| Line Regulation Current |
≤0.1% + 2.5mA |
| Rise Time No Load |
≤200ms |
| Rise Time Full Load |
≤300ms |
| Fall Time No Load |
≤20s |
| Fall Time Full Load |
≤300ms |
| Dynamic Response |
≤200ms |
| Efficiency |
≥85% |
| Input |
AC 220V, AC110V Optional |
| Cooling |
Temperature-Controlled Fan |
| Dimensions |
Approx. 22 × 8.5 × 15.5 cm |
| Net Weight |
Approx. 1.2 kg |
Why Choose KUAIQU SPPS-C605?
The KUAIQU SPPS-C605 provides a practical adjustable DC Supply Unit for bench-level 48V Telecom Equipment Testing. Its 0-60V output range, 0-5A current capability, and 300W maximum power provide flexibility for compatible telecom equipment and communication modules that require controlled DC input conditions.
For engineering, maintenance, and laboratory work, the SPPS-C605 combines several functions that are useful during DC power-related testing: the dual-knob encoder allows controlled voltage and current adjustment, the Voltage Current Power Display provides direct electrical readings, CV/CC operation supports different connected load conditions, and the Output Control allows power to be applied or removed during startup, shutdown, restart, and repeated testing procedures.
The SPPS-C605 can therefore be used across multiple stages of telecom equipment bench evaluation, including input testing, startup verification, operating observation, power consumption evaluation, DC input condition comparison, maintenance, and repeated power cycling. These functions make it a versatile DC Supply Unit for compatible 48V telecom equipment and related DC-powered communication electronics within its rated specifications.
