Click the link above to get the full user guide for this product.
KUAIQU R-SPS6030S 0-60V 0-30A 1800W
CC CV DC Power Supply for LED Burn-In
Testing
The KUAIQU R-SPS6030S is a high-power CC CV DC Power Supply designed for LED Burn-In Testing, LED aging tests, LED module testing, and long-duration evaluation of LED-related equipment. With a 0-60V adjustable output, 0-30A current capacity, and 1800W power rating, it provides adjustable DC power for LED test setups that require controlled voltage and current conditions.
For LED Burn-In Testing, different LED products, modules, and related equipment may require different operating conditions. The R-SPS6030S allows users to adjust voltage and current through the encoder, monitor voltage, current, and power directly on the four-digit display, and use CC/CV operation to establish the required output condition. OCP, OVP, Output ON/OFF, M1-M4 memory, panel lock, and rear high-current output further support repeated and higher-power LED testing.
Key Features
0-60V Adjustable DC Output for LED Burn-In Testing
The 0-60V adjustable output allows users to establish different DC voltage conditions for LED modules, lighting assemblies, and related LED test equipment. The adjustable range provides flexibility when different products require different test voltages.
0-30A Current Capacity for High Power LED Testing
With up to 30A output current, the R-SPS6030S provides substantial current capability for higher-power LED modules and LED test setups within its rated output range.
1800W Power Capacity for High Power LED Test Setups
The 1800W output capacity provides a high-power DC source for LED Burn-In Testing and other LED aging setups where a lower-power bench supply may not provide sufficient output capability.
CC and CV Operation for Controlled LED Test Conditions
The Constant Current and Constant Voltage modes allow users to establish controlled output conditions according to the requirements of the connected LED test setup.
Precision Encoder for Voltage and Current Adjustment
The encoder provides direct adjustment of voltage and current during test setup, allowing users to establish the required electrical conditions before starting an LED Burn-In Testing cycle.
Four-Digit Voltage, Current, and Power Display
The four-digit display provides direct readback of voltage, current, and power, allowing users to monitor the power supplied to the LED test setup during operation.
OCP and OVP Protection for LED Test Setups
Built-in Over Current Protection and Over Voltage Protection provide protection functions for abnormal current and voltage conditions during LED Burn-In Testing and related LED equipment testing.
M1-M4 Memory for Repeated LED Burn-In Conditions
The M1-M4 four-group memory function allows frequently used voltage and current settings to be stored and recalled. This is useful when different LED products require repeated test conditions.
Output ON/OFF for Direct Test Control
The Output ON/OFF function allows users to control when DC power is delivered to the LED test setup, making it convenient to start or stop power application without changing the configured voltage and current settings.
Panel Lock for Long-Duration LED Testing
The panel lock function helps prevent unintended changes to voltage and current settings after the required test parameters have been established.
Rear High-Current Output for Higher Current LED Testing
The rear high-current output provides the appropriate connection for higher-current applications. For output currents above 5A, the rear high-current terminals should be used to access the full rated current capability.
USB, RS232, and RS485 Communication Interfaces
The current product configuration includes USB, RS232, and RS485 communication interfaces, providing communication interface options for compatible LED testing equipment and test environments.
Applications
LED Burn-In Testing
The R-SPS6030S provides adjustable DC power for LED Burn-In Testing, allowing LED products or modules to operate under controlled voltage and current conditions during burn-in cycles.
LED Aging Testing
The adjustable output and CC/CV operation provide a controllable DC source for LED aging tests that require the connected product to operate under defined electrical conditions.
LED Module Burn-In Testing
The 0-60V, 0-30A, and 1800W output capability provides a high-power DC source for LED module burn-in setups within the rated operating range.
High Power LED Testing
The 1800W power rating and 30A current capability support LED test setups that require higher DC output power.
LED Lighting Product Aging Testing
The R-SPS6030S can provide adjustable DC power for aging tests of compatible LED lighting products and assemblies.
LED Driver Burn-In Testing
The adjustable DC output can be used as a power source for LED driver burn-in setups when the required input voltage and current fall within the R-SPS6030S output range.
LED Reliability Testing
The power supply can provide controlled DC operating conditions for LED reliability tests where voltage, current, and power need to be monitored during operation.
Repeated LED Production Testing
The M1-M4 memory function allows frequently used voltage and current settings to be recalled for repeated LED test conditions.
LED Test Bench Power Source
The R-SPS6030S can serve as an adjustable DC power source within an LED test bench, providing controllable voltage and current for compatible LED products and test equipment.
Long-Duration LED Test Setup
The combination of regulated CC/CV output, OCP, OVP, Output ON/OFF, panel lock, and direct V/I/P display provides practical control for extended LED testing setups.
Quality Check and Terms of Service:
-
Package includes: DC Power Supply *1, Output Power Cord *1, Input Power Cord *1, User Manual *1, Warranty Card *1.
-
Has passed CE & FCC Certification.
-
All DC power supplies and accessories are inspected before shipment to ensure good quality.
-
Customer support: Contact us with any questions, and we'll respond within 24 hours.
Technical Specifications
| Parameter |
Specification |
| Model |
R-SPS6030S |
| Product Type |
CC CV DC Power Supply |
| Application |
LED Burn-In Testing |
| Output Voltage |
0-60V |
| Output Current |
0-30A |
| Output Power |
1800W |
| Operating Mode |
CC / CV |
| Load Regulation Voltage |
≤0.1% + 10mV |
| Load Regulation Current |
≤0.1% + 2.5mA |
| Line Regulation Voltage |
≤0.01% + 2.5mV |
| Line Regulation Current |
≤0.1% + 2.5mA |
| Setting Resolution Voltage |
10mV |
| Setting Resolution Current |
10mA |
| Readback Resolution Voltage |
10mV |
| Readback Resolution Current |
10mA |
| Setting Accuracy Voltage |
≤0.05% + 10mV |
| Setting Accuracy Current |
≤0.01% + 10mA |
| Readback Accuracy Voltage |
≤0.05% + 10mV |
| Readback Accuracy Current |
≤0.01% + 10mA |
| Ripple Voltage |
≤800mVp-p / ≤120mVrms |
| Ripple Current |
≤40mArms |
| Ripple Test Range |
20Hz-20MHz |
| Rise Time, No Load |
≤100ms |
| Rise Time, Full Load |
≤150ms |
| Fall Time, No Load |
≤15s |
| Fall Time, Full Load |
≤50ms |
| Dynamic Response |
≤20ms |
| Efficiency |
≥85% |
| Display |
Four-Digit Voltage / Current / Power Display |
| Adjustment |
Precision Encoder |
| Protection |
OCP / OVP |
| Memory |
M1-M4, 4 Groups |
| Output Control |
Output ON/OFF |
| Output Connection |
Front and Rear Output |
| Communication |
USB / RS232 / RS485 |
| Panel Lock |
Yes |
| Product Dimensions |
Approx. 35 × 27 × 10cm |
| Net Weight |
Approx. 4.6kg |
| Package Dimensions |
Approx. 47 × 36 × 19cm |
| Package Weight |
Approx. 5.8kg |
The R-SPS6030S specification data above follows the current R-SPS-S High Power Memory Series data, including the 0-60V / 0-30A / 1800W output configuration, CC/CV operation, M1-M4 memory, OCP/OVP, regulation and accuracy specifications, ripple values, dynamic response, and physical specifications.
Why Choose KUAIQU R-SPS6030S?
60V Adjustable Output for Different LED Test Conditions
The 0-60V output range allows users to establish different voltage conditions for compatible LED products, modules, and related test equipment rather than being limited to a single fixed output voltage.
30A Current Capacity for Higher Power LED Applications
The 30A maximum output current provides the current capability required by higher-power LED test setups within the 1800W rated power range.
1800W High Power DC Supply
The 1800W output rating provides a substantial DC power source for LED Burn-In Testing, LED module aging, and higher-power LED test benches.
CC CV Operation for Flexible Test Setup
CC and CV operation allows the output mode to be selected according to the electrical requirements of the connected LED test setup.
Precision Encoder for Easy Parameter Adjustment
The encoder provides convenient voltage and current adjustment when setting up or changing LED burn-in conditions.
Direct Voltage, Current, and Power Monitoring
The four-digit V/I/P display allows users to observe the power supply output during LED Burn-In Testing and verify the actual electrical operating condition.
OCP and OVP Protection
OCP and OVP provide dedicated over-current and over-voltage protection functions for the power supply and connected test setup.
Four Memory Groups for Repeated LED Testing
M1-M4 memory provides four groups of stored settings, making it easier to recall commonly used LED burn-in parameters for repeated tests.
Output ON/OFF and Panel Lock
Output ON/OFF provides direct control of power application, while panel lock helps prevent accidental changes to established test parameters.
High-Current Rear Output
The rear high-current terminals provide the appropriate connection for higher-current LED testing and allow access to the full rated output current when properly connected.
Professional CC CV DC Power Supply for LED Burn-In Testing
With 0-60V adjustable output, 0-30A current, 1800W power, CC/CV operation, precision encoder adjustment, V/I/P display, OCP, OVP, M1-M4 memory, and Output ON/OFF control, the R-SPS6030S provides a practical high-power DC Power Supply for LED Burn-In Testing and related LED aging and reliability test applications.
