Click the link above to get the full user guide for this product.
KUAIQU Electroplating Testing DC Test
Supply SPPS-C1203 0-120V 0-3A 360W
with Encoder Adjustment
The KUAIQU SPPS-C1203 is a 0-120V 0-3A 360W DC Test Supply developed for controlled power testing in electroplating applications. It provides adjustable DC voltage and current for compatible plating test setups, allowing users to configure the electrical input supplied to an electroplating cell, electrodes, and related laboratory equipment.
For electroplating work, the power supply can be used to establish a selected plating voltage, adjust the available current condition, apply DC output to the test setup, and observe the resulting voltage, current, and power readings. The dual-knob Encoder Adjustment and independent Output Control make it convenient to change and repeat electrical test conditions during plating experiments and process development.
Key Features
0-120V DC Test Supply for Plating Power Setup
The SPPS-C1203 provides a 0-120V adjustable DC output for compatible electroplating test equipment. The wide voltage range allows users to configure the DC input required by different laboratory plating setups rather than working with a fixed supply voltage.
0-3A Adjustable Current for Plating Tests
The adjustable current range of 0-3A provides control over the electrical condition supplied to compatible electroplating setups. Users can establish different current settings during plating trials and observe the corresponding electrical readings on the front-panel display.
360W Output for Laboratory Plating Equipment
With a maximum output rating of 360W, the SPPS-C1203 can serve as a DC Test Supply for compatible laboratory-scale plating equipment and experimental circuits operating within the rated voltage, current, and power limits.
Encoder Adjustment for Plating Parameter Changes
The dual-knob Encoder Adjustment allows users to change voltage and current settings directly from the front panel. This is useful when a plating test requires different electrical settings between trials or when the operator needs to fine-tune the DC input condition during an experiment.
Separate Output Control for Plating Test Operation
The Output Control allows the user to prepare the required voltage and current settings before applying power to the plating setup. The output can then be enabled or disabled according to the test procedure, providing a convenient way to control the start and end of a plating power test.
Voltage, Current and Power Display During Plating
The 4-digit display provides Voltage, Current and Power readings during operation. These readings allow users to observe the actual electrical output supplied to the plating test setup rather than relying only on preset values.
CV/CC Operation for Different Plating Conditions
The SPPS-C1203 supports CV/CC operation and automatically switches according to the connected load and configured output conditions. This provides flexibility when the electrical characteristics of a compatible plating setup change during testing.
Repeatable Electrical Settings Between Plating Trials
The Encoder Adjustment makes it possible to return to selected voltage and current settings between individual test runs. This can help users maintain consistent electrical input conditions when comparing multiple plating trials.
Compact DC Test Supply for Plating Workstations
The compact bench-top design allows the SPPS-C1203 to be integrated into laboratory plating workstations, prototype process setups, and engineering benches without requiring a large dedicated DC power source.
Temperature-Controlled Cooling for Bench Operation
The SPPS-C1203 uses a temperature-controlled fan to support reliable bench operation while helping reduce unnecessary fan noise when lower cooling demand is present.
Applications
Plating Power Supply Setup
Use the SPPS-C1203 to establish adjustable DC power for compatible electroplating cells, electrodes, and laboratory plating circuits before beginning a test.
Plating Voltage Adjustment Tests
Different voltage settings can be established to evaluate how a compatible plating setup operates under different DC input conditions.
Plating Current Condition Tests
The 0-3A adjustable current range allows users to configure different current conditions for compatible plating experiments and observe the resulting electrical output.
Anode and Cathode Test Setup
The DC Test Supply can provide controlled DC power to compatible electroplating test arrangements involving anode and cathode connections, provided the complete setup remains within the power supply's rated output capability.
Plating Trial Comparison
Users can establish one set of voltage and current conditions, record the displayed electrical readings, then change the settings for another trial. This provides a practical method for comparing different electrical input conditions across plating tests.
Plating Process Development
During development of a laboratory plating setup, the adjustable DC output allows engineers to experiment with different supply conditions and identify suitable electrical settings for the compatible test configuration.
Plating Equipment Electrical Testing
The SPPS-C1203 can be used to provide controlled DC power while evaluating the electrical operation of compatible plating equipment, test circuits, and laboratory assemblies.
Repeated Plating Experiments
The Encoder Adjustment and Output Control support repeated test procedures in which the operator needs to apply, remove, and reconfigure DC power between individual plating trials.
Plating Setup Troubleshooting
Voltage, current, and power readings can help users identify changes in the electrical behavior of a compatible plating setup when checking wiring, connections, or unexpected operating conditions.
Laboratory Plating Workstations
The compact DC Test Supply is suitable for laboratory benches, educational experiments, engineering development stations, and other work areas where adjustable DC power is required for compatible electroplating testing.
Quality Check and Terms of Service
-
Package includes: DC Power Supply *1, Output Power Cord *1, Input Power Cord *1, User Manual *1, Warranty Card *1.
-
Has passed CE & FCC Certification.
-
All DC power supplies and accessories are inspected before shipment to ensure good quality.
-
Customer support: Contact us with any questions, and we'll respond within 24 hours.
Technical Specifications
| Parameter |
Specification |
| Model |
SPPS-C1203 |
| Rated Output Voltage |
0-120V |
| Rated Output Current |
0-3A |
| Rated Output Power |
360W |
| Rated Operating Temperature |
0-40℃ |
| Voltage Ripple |
≤300 mVp-p / ≤30 mVrms |
| Current Ripple |
≤30 mArms |
| Voltage Setting Accuracy |
≤0.01% + 15mV |
| Voltage Readback Accuracy |
≤0.01% + 15mV |
| Current Accuracy |
≤0.01% + 10mA |
| Voltage Setting Resolution |
<100V: 10mV; ≥100V: 0.1V |
| Voltage Readback Resolution |
<100V: 10mV; ≥100V: 0.1V |
| Current Setting Resolution |
1mA |
| Current Readback Resolution |
1mA |
| Load Regulation Voltage |
≤0.3% + 10mV |
| Load Regulation Current |
≤0.1% + 2.5mA |
| Line Regulation Voltage |
≤0.01% + 2.5mV |
| Line Regulation Current |
≤0.1% + 2.5mA |
| Rise Time No Load |
≤200ms |
| Rise Time Full Load |
≤300ms |
| Fall Time No Load |
≤30S |
| Fall Time Full Load |
≤300ms |
| Dynamic Response |
≤200ms |
| Efficiency |
≥85% |
| USB Output |
5V/2A |
| Input |
AC 220V, AC110V optional |
| Dimensions |
Approx. 22 × 8.5 × 15.5 cm |
| Net Weight |
Approx. 1.2 kg |
| Package Size |
Approx. 29.5 × 13 × 21 cm |
| Package Weight |
Approx. 1.65 kg |
| Carton Quantity |
8 pcs/carton |
Why Choose KUAIQU SPPS-C1203?
The KUAIQU SPPS-C1203 provides a 0-120V adjustable DC output, 0-3A current range, and 360W maximum output power in a compact DC Test Supply for electroplating testing.
For plating experiments, the important task is not simply supplying DC power, but establishing and changing the electrical conditions used by the particular plating test setup. The SPPS-C1203 allows users to configure voltage and current with the dual-knob Encoder Adjustment, apply power through the Output Control, and observe the actual Voltage, Current and Power readings during operation.
The wide 0-120V range also allows the same DC Test Supply to be used when different plating test configurations require different supply voltage settings. Users can change electrical conditions between trials, compare displayed operating parameters, and repeat selected settings during process development or laboratory testing.
With CV/CC operation, adjustable output, front-panel Encoder Adjustment, real-time electrical display, and independent Output Control, the SPPS-C1203 provides a practical laboratory DC Test Supply for electroplating power setup, plating equipment testing, process development, repeated plating trials, and electrical troubleshooting.
