Click the link above to get the full user guide for this product.
KUAIQU 60V 10A 600W Adjustable DC
Supply, R-SPS6010S with OVP for 48V
System Testing
The KUAIQU R-SPS6010S is a 60V 10A 600W Adjustable DC Supply designed for 48V System Testing and related DC-powered equipment evaluation. Its 0–60V adjustable output provides voltage headroom around the 48V operating range, allowing engineers to establish different DC supply conditions when evaluating 48V systems, electronic equipment, control circuits, and other compatible loads.
For repeated 48V testing, the R-SPS6010S combines M1-M3 memory presets, precision encoder adjustment, four-digit voltage/current/power monitoring, and Panel Lock to simplify test setup and maintain consistent operating conditions. OVP and OCP protection provide additional protection during controlled DC power testing.
Key Features
60V 10A 600W Adjustable DC Supply
The R-SPS6010S provides a 0–60V adjustable output, up to 10A current, and 600W maximum power. This range allows users to establish DC supply conditions around the 48V system voltage rather than being restricted to a fixed 48V output.
Adjustable Output for 48V System Testing
48V systems may need to be evaluated at different supply conditions during development and verification. The adjustable 0–60V output allows users to set the required voltage and current according to the specific test condition and connected equipment.
OVP Protection for Controlled Testing
The built-in Over Voltage Protection helps protect the power supply and connected test setup when an over-voltage condition occurs. This is particularly relevant when testing electronic equipment around a defined 48V operating condition.
OCP Protection for DC Test Loads
Over Current Protection provides an additional layer of protection when the connected 48V system or electronic load draws excessive current. It helps keep the test setup under controlled operating conditions.
Four-Digit Voltage, Current, and Power Display
The four-digit display provides real-time readings of output voltage, current, and power. Engineers can monitor the electrical conditions of a 48V system during startup, operation, and repeated test procedures.
Precision Encoder Adjustment
The precision encoder allows controlled adjustment of voltage and current settings. This makes it easier to establish consistent supply conditions when comparing system behavior at different DC input levels.
M1-M3 Memory Presets for Repeated Tests
Three memory groups, M1-M3, allow frequently used voltage and current settings to be stored and recalled. This is useful when a 48V system test procedure requires repeated testing under several predefined supply conditions.
Output ON/OFF Control
The Output ON/OFF function allows users to start or stop the DC output while keeping the configured settings available. This can simplify repeated connection, startup, and operating tests without repeatedly entering the same parameters.
Panel Lock for Consistent Test Conditions
The Panel Lock Button helps prevent unintended changes to voltage and current settings during testing. Once the desired 48V system test condition has been established, the lock function can help maintain the configured parameters.
Front and Rear Output Connections
The R-SPS6010S provides front and rear output connections for different laboratory and engineering setups. The front output is intended for applications below 5A, while the rear output can be used for the full rated output.
USB and Optional RS232/RS485 Communication Interfaces
The R-SPS6010S includes a standard USB port, with RS232/RS485 available as optional communication interfaces. These connection options can be used in compatible test environments where communication with external equipment is required.
Applications
48V System Testing
Provide adjustable DC power for evaluating 48V systems under different voltage and current conditions within the rated output range.
48V Equipment Evaluation
Use the 0–60V adjustable output to evaluate compatible 48V electronic equipment at different DC supply conditions while monitoring voltage, current, and power.
48V System Startup Testing
Establish controlled DC input conditions for checking system startup behavior and observing the electrical parameters during the startup process.
48V System Operating Tests
Provide adjustable DC power while the system is operating, allowing engineers to monitor actual voltage, current, and power during defined test conditions.
48V System Voltage Condition Testing
Use different voltage settings within the 0–60V range when evaluating how compatible 48V systems and equipment operate under different supply conditions.
48V Electronic Equipment Testing
Provide a controllable DC source for compatible electronic equipment designed around 48V-class operating conditions, subject to the equipment's rated input requirements.
48V Control Circuit Testing
Supply adjustable DC power to compatible control circuits and electronic assemblies that require a controlled DC input during development and laboratory testing.
Repeated 48V System Testing
Use M1-M3 memory presets to store frequently used voltage and current conditions for repeated 48V system test procedures, reducing repeated manual setup.
48V System Protection Testing
Use adjustable voltage and current settings together with OVP and OCP protection when conducting controlled tests involving defined electrical operating conditions.
Laboratory 48V Power Testing
The adjustable output, four-digit monitoring display, memory presets, protection functions, output control, and Panel Lock make the R-SPS6010S suitable for laboratory and engineering bench testing of compatible 48V systems.
Quality Check and Terms of Service:
-
Package includes: DC Power Supply *1, Output Power Cord *1, Input Power Cord *1, User Manual *1, Warranty Card *1.
-
Has passed CE & FCC Certification.
-
All DC power supplies and accessories are inspected before shipment to ensure good quality.
-
Customer support: Contact us with any questions, and we'll respond within 24 hours.
Technical Specifications
| Parameter |
Specification |
| Model |
R-SPS6010S |
| Product Type |
Adjustable DC Supply |
| Output Voltage |
0–60V |
| Output Current |
0–10A |
| Rated Power |
600W |
| Voltage Setting Resolution |
10mV |
| Current Setting Resolution |
10mA |
| Voltage Readback Resolution |
10mV |
| Current Readback Resolution |
10mA |
| Voltage Setting Accuracy |
≤0.05% + 10mV |
| Current Setting Accuracy |
≤0.01% + 10mA |
| Voltage Readback Accuracy |
≤0.05% + 10mV |
| Current Readback Accuracy |
≤0.01% + 10mA |
| Voltage Load Regulation |
≤0.1% + 10mV |
| Current Load Regulation |
≤0.1% + 2.5mA |
| Voltage Line Regulation |
≤0.01% + 2.5mV |
| Current Line Regulation |
≤0.1% + 2.5mA |
| Voltage Ripple |
≤400mVp-p / ≤60mVrms |
| Current Ripple |
≤20mArms |
| Rise Time, No Load |
≤150ms |
| Rise Time, Full Load |
≤200ms |
| Fall Time, No Load |
≤15s |
| Fall Time, Full Load |
≤50ms |
| Dynamic Response |
≤20ms |
| Efficiency |
≥85% |
| Memory Presets |
M1-M3, 3 Groups |
| Protection |
OCP, OVP |
| Display |
Four-Digit Voltage, Current, and Power Display |
| Output Control |
Output ON/OFF |
| Communication Interface |
Standard USB, Optional RS232/RS485 |
| Output Connections |
Front and Rear |
| Front Output Rating |
Below 5A |
| Rear Output |
Full Rated Output |
| Operating Temperature |
0°C–40°C |
| Dimensions |
Approx. 26.5 × 19 × 8.5 cm |
| Net Weight |
Approx. 2.5 kg |
Why Choose KUAIQU R-SPS6010S?
The KUAIQU R-SPS6010S is built around the practical requirements of 48V System Testing. Its 0–60V adjustable output gives engineers room to establish different DC supply conditions around a 48V operating range, while the 10A current capability and 600W rated power support compatible medium-power 48V system test setups.
During testing, the four-digit display provides direct visibility of voltage, current, and power, while the precision encoder makes voltage and current adjustments easier to control. OVP and OCP provide protection functions for controlled test operation.
For repeated evaluation, the M1-M3 memory presets allow frequently used test conditions to be recalled without repeatedly entering the same settings. Panel Lock can help prevent accidental parameter changes once the required test condition has been established.
With front and rear output connections, standard USB connectivity, optional RS232/RS485 communication interfaces, and a 0–60V adjustable output range, the R-SPS6010S provides a flexible DC power source for 48V System Testing, 48V equipment evaluation, startup testing, operating tests, and repeated laboratory power testing.
