Blog

In battery charging scenarios, "overcharging damage" and "difficulty adapting to different battery types" are two long-standing pain points for users. Using a lead-acid battery charger for lithium batteries may cause battery swelling due to mismatched charging curves; manually monitoring charging duration can easily lead to shortened battery life if overcharged; even reversing the positive and negative poles of a traditional power supply can directly burn the battery protection board. However, KUAIQU's charging DC regulated power supplies (SPPS-C series) precisely solve these problems through intelligent functions such as multi-battery type adaptation and real-time capacity monitoring, turning battery charging from a "careful task" into a "worry-free and efficient process".

I. 3 Core Pain Points of Battery Charging: Hard to Solve with Traditional Methods

Whether it is an electric vehicle repair shop charging customers' batteries or a laboratory maintaining test batteries, traditional charging tools (such as ordinary chargers and general-purpose regulated power supplies) often face the following difficulties:

Lithium batteries, lead-acid batteries, and lithium iron phosphate batteries have completely different charging logics. Lithium batteries require a "constant current-constant voltage" curve, lead-acid batteries need "three-stage charging", and lithium iron phosphate batteries have specific voltage thresholds (e.g., 3.65V cutoff for a single cell). Traditional chargers mostly adapt to only one type. Using a lead-acid charger for lithium batteries will cause electrolyte decomposition due to continuous high voltage, shortening battery life by more than 50%. Forcing the use of a general-purpose power supply with manual adjustment requires repeatedly checking battery parameters, which is cumbersome and error-prone.

Traditional power supplies lack an automatic power-off function. When charging a 12V/12Ah lead-acid battery, manual recording of charging time (usually 8-10 hours) is required. Forgetting to cut off power will cause the battery to heat up and swell due to overcharging, and even pose safety hazards in severe cases. An electric vehicle repair shop once counted that the battery repair rate caused by overcharging accounted for 35% of total failures.

Most traditional power supplies have no protective design when the positive and negative poles are reversed, which will directly conduct large currents and burn the battery protection board or internal components of the power supply. Especially for novice operators, equipment damage caused by wiring negligence costs an average of $ 30 to$70 per repair.

II. KUAIQU SPPS-C Series: 3 Intelligent Functions to Solve Charging Problems

Targeting the above pain points, KUAIQU SPPS-C series charging DC regulated power supplies have made special upgrades from three dimensions: "adaptation, safety, and efficiency". Each function accurately meets the needs of actual charging scenarios.

1. One-Click Adaptation to Multiple Battery Types, Say Goodbye to "Incorrect Charging" Risks

The core advantage of the SPPS-C series lies in its built-in multi-battery type charging algorithm. No additional manual parameter adjustment is needed; just press the "Battery Type" button on the panel to switch modes:

2. Real-Time Capacity + Automatic Power-Off, Free from "Manual Monitoring"

The 4-digit LED display of the SPPS-C series not only shows real-time voltage and current but also synchronously displays the charging capacity (Ah), making the charging progress clear at a glance. When charging a 12V/12Ah lead-acid battery, the screen will gradually jump from "0Ah" to "11.8Ah" (close to full capacity). It automatically cuts off the output when reaching the set capacity, no manual intervention is required.

In addition, the series also supports adjustable charging current (0-5A/0-10A optional, depending on the model). Users can flexibly set it according to the battery's newness: use standard current (0.5C) for fast charging of new batteries, and small current (0.2C) for slow charging and repairing old batteries, balancing efficiency and battery protection.

Data Comparison: A traditional charger takes 10 hours to charge a 12Ah lead-acid battery and requires manual monitoring. The SPPS-C305C can fully charge it in 2.5 hours with 6A current, and no supervision is needed after automatic power-off, reducing labor costs by 100%.

3. Triple Protection Design, Eliminate Losses from "Misoperation"

To address safety risks in charging scenarios, the SPPS-C series has built-in multiple protection mechanisms to avoid losses from misoperation at the source:

III. Scene Test: Dual Improvement in Efficiency and Safety

To intuitively demonstrate the advantages of the SPPS-C series, we compared the performance of a traditional charger and the KUAIQU SPPS-C305C in the scenario of "charging a 12V/12Ah lead-acid battery":

Comparison Dimension	Traditional Charger	KUAIQU SPPS-C305C	Improvement Effect
Charging Time	8-10 hours	2.5-3 hours	Efficiency increased by over 200%
Manual Intervention	Full supervision and manual power-off required	Automatic full charge detection, no intervention needed	Labor cost reduced to 0
Battery Protection	No overcharging protection, easy to swell	Automatic power-off + overtemperature protection	Repair rate reduced by 35%
Multi-Type Adaptation	Only supports single battery type	Three modes for lithium/lead-acid/lithium iron phosphate batteries	Applicable scenarios increased by 200%
Reverse Connection Protection	None, easy to burn equipment	Alarm + no output	Misoperation loss reduced to 0

IV. Purchase Suggestions: Which SPPS-C Model is Suitable for You?

The SPPS-C series includes 4 models covering different power needs. You can choose according to actual charging scenarios:

V. Conclusion: Upgrade from "Can Charge" to "Can Charge Properly"

The core demand for battery charging has long upgraded from "being able to charge" to "safe, efficient, and non-damaging". KUAIQU SPPS-C series charging DC regulated power supplies precisely solve the pain points of traditional charging methods through intelligent functions such as multi-type adaptation, automatic power-off, and multiple protections. They not only improve charging efficiency but also fundamentally protect the safety of batteries and equipment.

Currently, this series has passed CE and FCC certifications. The official website provides a 3-year warranty and 24-hour customer support. If you often face difficulties in charging multiple types of batteries or are troubled by the efficiency and safety issues of traditional charging methods, you can visit the KUAIQU official website (https://www.kuaiquinstrument.com/products/spps-c-c) to view specific model parameters, or consult customer service for exclusive selection suggestions, making battery charging truly "worry-free and reliable".