SPS3010-2KD High-Current DC Supply for
Electromagnetic Brake Testing NICE-POWER 30V
10A 300W×2
Dual Output DC Power Supply for Electromagnetic Brake Coil Testing
The NICE-POWER SPS3010-2KD High-Current DC Supply is designed for electromagnetic brake coil testing, brake component development, and industrial electrical testing. Electromagnetic brakes rely on electrical coils to generate magnetic force, making a stable and adjustable DC power source important for evaluating their electrical operating conditions.
The SPS3010-2KD features two independent output channels, each delivering 0–30V, 0–10A, and 300W. This configuration allows engineers to supply DC power to two compatible brake coils or electrical components independently. By adjusting output voltage and current while observing the displayed electrical readings, users can evaluate power consumption and check the basic electrical operation of electromagnetic brake assemblies.
For testing setups that require different voltage or current configurations, one-key series and parallel modes provide additional output flexibility. With encoder adjustment, dedicated combined-output terminals, and clear voltage, current, and power displays, the SPS3010-2KD is a versatile bench power solution for electromagnetic brake development and electrical verification.
Key Features
High-Current Dual Output for Electromagnetic Brake Coils
-
Two independent output channels, each providing 0–30V, 0–10A, and 300W, allowing separate DC power supply to two compatible electromagnetic brake coils.
-
Independent voltage and current adjustment helps users configure the supply according to the rated electrical requirements of different brake coils.
-
Separate voltage, current, and power readings make it convenient to observe the electrical load of each connected brake coil.
-
The dual-channel configuration supports testing two compatible brake assemblies at the same workstation without requiring two separate power supplies.
Adjustable Current for Brake Coil Electrical Evaluation
-
Adjustable current settings allow users to establish appropriate current limits for compatible electromagnetic brake coils during testing.
-
Current resolution of 1mA supports fine adjustment when configuring low-voltage DC loads.
-
The CV/CC indicators show the operating state of the output channels, helping users observe whether the power supply is operating in constant-voltage or constant-current mode.
-
Current and power readings provide useful references when comparing the electrical consumption of different brake coils.
One-Key Series and Parallel Modes for Flexible Testing
-
Series mode combines both channels to provide 0–60V, 0–10A, and up to 600W for compatible DC loads requiring a higher supply voltage.
-
Parallel mode combines both channels to provide 0–30V, 0–20A, and up to 600W for compatible loads requiring greater current capacity.
-
Dedicated series-parallel output ports simplify connections when switching between different output configurations.
-
These combined modes provide additional flexibility for testing electromagnetic brake coils and other compatible DC components with different electrical requirements.
Stable DC Output for Repeated Electrical Tests
-
Voltage load regulation of ≤0.3%+10mV supports consistent output voltage when the connected load changes.
-
Current load regulation of ≤0.1%+2.5mA helps maintain stable current output under specified operating conditions.
-
Voltage line regulation of ≤0.01%+2.5mV helps reduce the influence of input voltage variations on the output.
-
Low output ripple supports stable DC power delivery during electromagnetic brake coil and industrial component testing.
Convenient Controls for Industrial Bench Testing
-
Encoder adjustment provides convenient voltage and current setting during brake coil evaluation and electrical troubleshooting.
-
Independent, series, and parallel modes accommodate different DC supply requirements without complicated external wiring.
-
Negative voltage, zero, and positive voltage output mode provides additional output polarity options for compatible electrical testing applications.
-
A built-in 5V/2A USB output provides an additional power connection for compatible USB-powered accessories.
Applications
Electromagnetic Brake Coil Testing
Provides adjustable DC power for compatible electromagnetic brake coils, allowing technicians to configure supply voltage and current according to the coil's rated electrical requirements and observe its electrical load during testing.
Electromagnetic Brake Electrical Performance Verification
Supports basic electrical verification of brake assemblies by supplying controlled DC power and monitoring output voltage, current, and power readings during operation.
Dual Electromagnetic Brake Comparison Testing
The two independent output channels allow users to power two compatible brake coils separately. Different voltage and current settings can be configured to compare their electrical consumption under specified test conditions.
Industrial Brake Component Development
Provides adjustable DC power for electromagnetic brake prototypes and related electrical components during development, troubleshooting, and laboratory verification.
Brake Coil Current Requirement Evaluation
Allows users to adjust the current limit and observe the actual output current when powering compatible brake coils, helping evaluate their electrical supply requirements.
Industrial Electromagnetic Component Testing
Suitable for supplying adjustable DC power to compatible electromagnetic coils, relay components, and other industrial DC loads that require independent or combined output configurations.
Quality Check and Terms of Service:
Package Includes:
-
DC Power Supply × 1
-
Output Power Cord × 1
-
Input Power Cord × 1
-
User Manual × 1
-
Warranty Card × 1
Certifications: Has passed CE & FCC Certification.
Quality Inspection: All DC power supplies and accessories are inspected before shipment to ensure good quality.
Customer Support: Contact us with any questions, and we'll respond within 24 hours.
Technical Specifications
| Parameter |
SPS3010-2KD |
| Product Type |
Dual Channel DC Bench Power Supply |
| Independent Output Voltage |
0–30V × 2 |
| Independent Output Current |
0–10A × 2 |
| Independent Output Power |
300W × 2 |
| Series Mode Voltage |
0–60V |
| Series Mode Current |
0–10A |
| Series Mode Power |
600W |
| Parallel Mode Voltage |
0–30V |
| Parallel Mode Current |
0–20A |
| Parallel Mode Power |
600W |
| USB Output |
5V / 2A |
| Load Regulation – Voltage |
≤0.3%+10mV |
| Load Regulation – Current |
≤0.1%+2.5mA |
| Line Regulation – Voltage |
≤0.01%+2.5mV |
| Line Regulation – Current |
≤0.1%+2.5mA |
| Setting Resolution – Voltage |
10mV |
| Setting Resolution – Current |
1mA |
| Readback Resolution – Voltage |
10mV |
| Readback Resolution – Current |
1mA |
| Setting Accuracy – Voltage |
≤0.05%+10mV |
| Setting Accuracy – Current |
≤0.01%+10mA |
| Readback Accuracy – Voltage |
≤0.05%+10mV |
| Readback Accuracy – Current |
≤0.01%+10mA |
| Ripple – Voltage (Independent Mode) |
≤180mVp-p, ≤15mVrms |
| Ripple – Voltage (Series/Parallel Mode) |
≤200mVp-p, ≤20mVrms |
| Ripple – Current (Independent Mode) |
≤15mArms |
| Ripple – Current (Series/Parallel Mode) |
≤30mArms |
| Rise Time (No Load) |
≤200ms |
| Rise Time (Full Load) |
≤300ms |
| Fall Time (No Load) |
≤15s |
| Fall Time (Full Load) |
≤300ms |
| Dynamic Response |
≤200ms |
| Efficiency |
≥85% |
| Input Voltage / Current |
110V / 8A; 220V / 5A |
| Operating Temperature |
0°C–40°C |
| Dimensions |
Approx. 27.5 × 12 × 15cm |
| Net Weight |
Approx. 2.36kg |
Why Choose NICE-POWER SPS3010-2KD?
Electromagnetic brake testing requires a suitable DC supply to evaluate coil electrical characteristics and verify operating conditions. The NICE-POWER SPS3010-2KD combines two independent 0–30V, 0–10A output channels with flexible series and parallel configurations, providing different supply options for compatible brake coils and industrial electromagnetic components.
Its current adjustment, 1mA current resolution, and clear electrical readings help technicians configure and observe coil power requirements during bench testing. The dual-channel design also makes it possible to evaluate two compatible brake coils independently using one instrument.
For industrial maintenance teams, brake component manufacturers, and electrical R&D laboratories, the SPS3010-2KD offers a practical high-current DC bench supply for electromagnetic brake coil testing and related electrical verification.
