KUAIQU SPS3010C 30V 10A Bench Power

Supply for Automotive Electronics Repair

The KUAIQU SPS3010C is a 30V 10A bench power supply designed for automotive electronics testing, vehicle electrical troubleshooting, component testing, and repair applications. With a maximum output of 0–30V, 0–10A, and 300W, the SPS3010C provides adjustable DC power for automotive electronic modules, vehicle accessories, motors, relays, actuators, lighting systems, and other compatible low-voltage electrical loads.

The SPS3010C is particularly suitable for automotive electronics repair and troubleshooting, where technicians need adjustable DC power to reproduce 12V and 24V electrical conditions without relying entirely on the vehicle battery. Its adjustable output allows users to set appropriate voltage and current parameters while monitoring electrical conditions during testing.

The SPS3010C is suitable for:

• Automotive electronics repair

• Vehicle electrical troubleshooting

• 12V automotive system testing

• 24V electrical system testing

• Automotive component testing

• Motor and actuator testing

• Relay and solenoid testing

• Vehicle accessory testing

• Automotive module power testing

• Battery charging and testing

Its combination of adjustable DC output, 300W power capability, OCP protection, battery charging functions, and real-time electrical parameter display makes it a practical bench power supply for automotive electronics repair.

Key Features

Adjustable 30V 10A Output for Automotive Electronics Repair:

The SPS3010C provides 0–30V adjustable output voltage and 0–10A adjustable output current, with a maximum output power of 300W. This provides additional current capacity for automotive electronics and electrical loads that require more power during testing and repair.

As a 30V 10A bench power supply for automotive electronics repair, the SPS3010C allows technicians to adjust the output according to the requirements of the device under test. The 0–30V range is suitable for common 12V and 24V automotive electrical systems, while the 10A current capability provides additional capacity for compatible motors, actuators, relays, solenoids, fans, and other electrical loads.

The SPS3010C supports:

• 0–30V adjustable output voltage

• 0–10A adjustable output current

• 300W maximum output power

• 10mV voltage setting resolution

• 1mA current setting resolution

• 10mV voltage readback resolution

• 1mA current readback resolution

The adjustable output makes the SPS3010C useful for automotive component testing, vehicle electronics troubleshooting, module power-up testing, and repair work.

Smart Battery Charging for Automotive Electrical Testing:

The SPS3010C also provides a dedicated battery charging function for compatible rechargeable batteries.

The battery charging function includes:

• Battery charging mode

• Charging status indication

• Accumulated charged amount display in Ah

• Reverse polarity protection

• Overcharge protection

• Automatic output shutdown after the battery is fully charged

This function can be useful when repairing and testing battery-powered automotive electronics or evaluating charging-related electrical systems.

The Ah display allows technicians to monitor the accumulated amount of charge delivered during a charging session, providing additional information when evaluating battery charging conditions.

OCP Protection for Automotive Electronics Repair:

The SPS3010C provides OCP (Over Current Protection) to help protect the power supply and connected load when excessive current conditions occur.

During automotive electronics repair, abnormal loads, incorrect connections, shorted components, or faulty electrical devices may result in excessive current. OCP provides additional protection when these conditions occur.

This is particularly useful for:

• Automotive electronic module testing

• Motor testing

• Actuator testing

• Relay testing

• Solenoid testing

• Vehicle accessory testing

• Electrical troubleshooting

• Component repair

Low-Ripple Regulated DC Output:

The SPS3010C provides regulated DC output with specified ripple performance for automotive electronics and electrical testing.

The voltage ripple is specified at:

• ≤100mVp-p

• ≤15mVrms

The current ripple is:

• ≤15mArms

The regulated output and specified ripple performance make the SPS3010C suitable for powering compatible automotive electronic modules, control circuits, vehicle accessories, and electrical components during testing and troubleshooting.

Automotive Electronics Testing & Repair Protection

OCP — Over Current Protection

The SPS3010C provides an OCP (Over Current Protection) function to help protect the power supply and connected equipment when excessive current conditions occur.

During automotive electronics testing, faulty components, abnormal loads, incorrect connections, or short circuits may result in excessive current. OCP helps provide additional protection under these conditions.

This function is useful when testing:

• Automotive control modules

• Vehicle electronic components

• Motors and actuators

• Relays and solenoids

• Vehicle accessories

• Automotive electrical circuits

Reverse Polarity Protection

The SPS3010C provides reverse polarity protection during its battery charging function.

Incorrect battery connection can cause abnormal charging conditions. The battery charging function is designed to provide protection against damage caused by reverse polarity.

This function is particularly useful for:

• Automotive battery charging

• Battery-powered electronics testing

• Battery charging circuit testing

• Automotive electrical repair

• Charging process verification

The charging status indication provides additional information during the charging process.

Overcharge Protection

The dedicated battery charging function provides overcharge protection.

When the battery reaches full charge, the SPS3010C can automatically turn off the output to help prevent continued charging after the battery reaches its charging limit.

This provides additional convenience when testing rechargeable batteries and automotive electronic systems.

Output Switch

The independent OUTPUT control allows technicians to set the required voltage and current parameters before applying output power to the connected automotive device.

This helps reduce the possibility of applying an unintended output condition when connecting automotive electronic modules, vehicle accessories, motors, relays, or other electrical loads.

✦ Real-Time Electrical Parameter Display

The SPS3010C provides a digital display for monitoring important electrical parameters during operation.

Users can observe:

• Voltage

• Current

• Power

• Ah

• Charging status

• Output status

During automotive electronics testing and repair, the real-time display allows technicians to observe voltage, current, and power conditions while the connected device is operating.

The Ah display is particularly useful during battery charging, allowing users to monitor the accumulated amount of charge delivered during the charging process.

✦ Precise Encoder Adjustment

The SPS3010C uses encoder controls for voltage and current adjustment.

The encoder adjustment system allows technicians to conveniently set the required voltage and current during automotive electronics testing, component evaluation, and repair.

With:

• 10mV voltage setting resolution

• 1mA current setting resolution

users can make fine adjustments to the output parameters according to the requirements of the connected automotive electrical system.

✦ USB-A & USB-C Fast Charging Output

In addition to the adjustable regulated DC output, the SPS3010C provides USB-A and USB-C charging ports for compatible USB devices.

The USB-A output supports:

• PE1.1/2.0

• Apple BC1.2

• AFC

• FCP

• QC2.0/QC3.0

The USB-C output supports:

• PE1.1/2.0

• Apple BC1.2

• AFC

• FCP

• QC2.0/QC3.0

• PD3.0

• PPS

The USB charging ports provide additional convenience at automotive electronics repair workstations when charging compatible portable electronic devices and accessories.

✦ Compact 300W Bench Power Supply

The SPS3010C combines a 0–30V / 0–10A adjustable output with a maximum power rating of 300W, providing higher current capacity for automotive electronics repair and testing compared with lower-current bench power supplies.

The SPS3010C is suitable for automotive repair shops, electrical workshops, engineering workstations, laboratories, and automotive electronics R&D environments.

The SPS3010C combines:

• Adjustable 0–30V output

• Adjustable 0–10A output

• 300W maximum power

• OCP protection

• Low-ripple regulated DC output

• Battery charging function

• Real-time voltage, current and power display

• Real-time Ah display

• Reverse polarity protection

• Overcharge protection

• Automatic output shutdown after full charge

• USB-A fast charging

• USB-C fast charging

• Encoder adjustment

• Output ON/OFF control

It is particularly useful for testing:

• Automotive electronic modules

• Vehicle control circuits

• 12V electrical systems

• 24V electrical systems

• Automotive motors

• Actuators

• Relays and solenoids

• Vehicle lighting

• Fans and pumps

• Vehicle accessories

• Battery-powered electronics

• Automotive charging systems

✦ Wide Range of Applications

The SPS3010C is designed for applications requiring adjustable and regulated DC power for automotive electronics testing, electrical troubleshooting, component evaluation, and repair, especially:

Automotive Electronics Testing & Repair

• Automotive electronic module testing

• Vehicle control module power testing

• Automotive PCB testing

• Vehicle electrical troubleshooting

• Automotive component testing

• Electronic module power-up testing

• Automotive circuit debugging

• Vehicle accessory testing

12V & 24V Automotive Electrical Systems

• 12V automotive system testing

• 24V electrical system testing

• Vehicle electrical component evaluation

• Automotive power input testing

• Vehicle electrical troubleshooting

• Automotive module testing

• Low-voltage vehicle system testing

Motor, Actuator & Relay Testing

• DC motor testing

• Automotive actuator testing

• Solenoid testing

• Relay testing

• Fan testing

• Pump testing

• Electrical load testing

• Automotive component troubleshooting

Battery Charging & Electrical Testing

• Rechargeable battery charging

• Battery charging condition monitoring

• Ah charging amount monitoring

• Battery-powered automotive electronics testing

• Charging process verification

• Automotive electrical maintenance

• Battery charging circuit testing

The SPS3010C provides adjustable regulated DC power, 300W power capability, OCP protection, battery charging protection, and real-time electrical parameter monitoring to support automotive electronics testing, vehicle electrical troubleshooting, component testing, motor and actuator testing, battery charging, and automotive electronics repair.

✦ Quality Assurance & Customer Support

Each package includes:

1 × DC power supply

1 × output power cable

1 × input power cable

1 × user manual

1 × warranty card

All DC power supplies and accessories undergo inspection before shipment to ensure reliable quality. The SPS3010C has passed CE & FCC certification.

We provide professional after-sales service and technical support. If you have any questions about the SPS3010C 30V 10A bench power supply for automotive electronics repair, please feel free to contact us.

Technical Specifications

Why Choose KUAIQU SPS3010C?

For automotive electronics testing and repair, technicians need a bench power supply that can provide adjustable DC output, sufficient current capacity, clear electrical parameter monitoring, and protection functions for different vehicle electrical loads.

The KUAIQU SPS3010C combines:

✓ 0–30V / 0–10A adjustable output

✓ 300W power capability

✓ Regulated adjustable DC output

✓ OCP protection

✓ Low-ripple DC output

✓ 10mV voltage setting/readback resolution

✓ 1mA current setting/readback resolution

✓ Real-time voltage, current and power display

✓ Real-time Ah accumulated charge display

✓ Reverse polarity protection

✓ Overcharge protection

✓ Automatic output shutdown after full charge

✓ Dedicated battery charging function

✓ USB-A + USB-C fast charging

✓ Precision encoder adjustment

✓ Output ON/OFF control

Providing a practical testing and repair solution for automotive electronic module testing, vehicle electrical troubleshooting, 12V and 24V system testing, automotive component testing, motor and actuator testing, relay testing, vehicle accessory testing, battery charging, and automotive electronics repair.