KUAIQU SPS3010C 30V 10A Adjustable

Bench Power Supply for DC Motor &

Actuator Testing

The KUAIQU SPS3010C is a 30V 10A adjustable bench power supply designed for DC motor testing, actuator testing, electrical load testing, component evaluation, and electronics repair applications. With a maximum output of 0–30V, 0–10A, and 300W, the SPS3010C provides adjustable DC power for compatible DC motors, actuators, solenoids, relays, fans, pumps, and other low-voltage electrical loads.

The SPS3010C is particularly suitable for DC motor and actuator testing, where technicians and engineers need adjustable voltage and current to power a device under test while monitoring its electrical operating conditions. The 0–30V output range and up to 10A current capability provide flexibility for different low-voltage motor and actuator test requirements.

The SPS3010C is suitable for:

• DC motor testing

• DC actuator testing

• Solenoid testing

• Relay testing

• Fan and pump testing

• Electrical load testing

• Motor and actuator troubleshooting

• Electronic component testing

• Prototype and development testing

• Laboratory electrical testing

Its combination of adjustable output, 300W power capability, OCP protection, low-ripple regulated output, real-time electrical parameter display, and encoder adjustment makes it a practical adjustable bench power supply for DC motor and actuator testing.

Key Features

Adjustable 30V 10A Output for DC Motor Testing:

The SPS3010C provides 0–30V adjustable output voltage and 0–10A adjustable output current, with a maximum output power of 300W. This provides flexible power adjustment for compatible DC motors, actuators, solenoids, relays, fans, pumps, and other electrical loads.

As an adjustable bench power supply for DC motor and actuator testing, the SPS3010C allows technicians to set the required voltage and current according to the requirements of the device under test. The adjustable output is useful when evaluating motor or actuator operation under different supply conditions.

The SPS3010C supports:

• 0–30V adjustable output voltage

• 0–10A adjustable output current

• 300W maximum output power

• 10mV voltage setting resolution

• 1mA current setting resolution

• 10mV voltage readback resolution

• 1mA current readback resolution

The adjustable output makes the SPS3010C useful for powering compatible DC motors and actuators during functional testing, electrical troubleshooting, component evaluation, and development work.

OCP Protection for Motor & Actuator Testing:

The SPS3010C provides OCP (Over Current Protection) to help protect the power supply and connected load when excessive current conditions occur.

During DC motor and actuator testing, abnormal loads, incorrect connections, stalled or faulty components, or other unexpected conditions may result in excessive current. OCP provides additional protection when these conditions occur.

This is particularly useful for:

• DC motor testing

• Actuator testing

• Solenoid testing

• Relay testing

• Fan testing

• Pump testing

• Electrical load testing

• Motor troubleshooting

Battery Charging Function for Electrical Testing:

In addition to its adjustable DC output, the SPS3010C includes a dedicated battery charging function for compatible rechargeable batteries.

The battery charging function includes:

• Battery charging mode

• Charging status indication

• Accumulated charged amount display in Ah

• Reverse polarity protection

• Overcharge protection

• Automatic output shutdown after the battery is fully charged

Although DC motor and actuator testing is the primary application, this function can also be useful when testing battery-powered motors, actuators, and other electronic systems that incorporate rechargeable batteries.

The Ah display allows users to monitor the accumulated amount of charge delivered during a charging session.

Low-Ripple Regulated DC Output:

The SPS3010C provides regulated DC output with specified ripple performance for motor, actuator, and electronic component testing.

The voltage ripple is specified at:

• ≤100mVp-p

• ≤15mVrms

The current ripple is:

• ≤15mArms

The regulated output and specified ripple performance make the SPS3010C suitable for powering compatible DC motors, actuators, control circuits, and electrical components during testing and troubleshooting.

DC Motor & Actuator Testing Protection

OCP — Over Current Protection

The SPS3010C provides an OCP (Over Current Protection) function to help protect the power supply and connected equipment when excessive current conditions occur.

During DC motor and actuator testing, abnormal loads, incorrect connections, stalled motors, or faulty components may result in excessive current. OCP helps provide additional protection under these conditions.

This function is useful when testing:

• DC motors

• Linear actuators

• Solenoids

• Relays

• Fans

• Pumps

• Other compatible electrical loads

Reverse Polarity Protection

The SPS3010C provides reverse polarity protection during its battery charging function.

Incorrect battery connection can cause abnormal charging conditions. The battery charging function is designed to provide protection against damage caused by reverse polarity.

This function is particularly useful when the tested motor or actuator system includes a rechargeable battery or battery-powered control system.

It can support applications such as:

• Battery-powered motor testing

• Battery-powered actuator testing

• Rechargeable battery charging

• Battery charging circuit testing

• Electrical system maintenance

Overcharge Protection

The dedicated battery charging function provides overcharge protection.

When the battery reaches full charge, the SPS3010C can automatically turn off the output to help prevent continued charging after the battery reaches its charging limit.

This provides additional convenience when testing battery-powered motors, actuators, and other rechargeable electronic systems.

Over-Temperature Protection

The SPS3010C provides over-temperature protection as an additional protection function during operation.

Temperature protection is useful when the power supply is operated for extended periods or under higher-output conditions during motor, actuator, and electrical load testing.

This function provides additional protection for:

• Extended motor testing

• Actuator testing

• Electrical load testing

• Laboratory testing

• Electronics repair workstations

Short-Circuit Alarm

The SPS3010C provides a short-circuit alarm to alert users when a short-circuit condition is detected.

During motor and actuator testing, incorrect wiring or abnormal loads may result in short-circuit conditions. The short-circuit alarm provides a visual/audio indication to help users identify an abnormal output condition.

This is useful for:

• Motor wiring checks

• Actuator connection testing

• Solenoid testing

• Relay testing

• Electrical troubleshooting

• Component testing

Output Switch

The independent OUTPUT control allows technicians to set the required voltage and current parameters before applying output power to the connected motor or actuator.

This makes it convenient to prepare the required test parameters before energizing the device under test.

The output switch is useful for:

• DC motor testing

• Actuator testing

• Solenoid testing

• Relay testing

• Electrical load testing

• Component troubleshooting

✦ Real-Time Electrical Parameter Display

The SPS3010C provides a digital display for monitoring important electrical parameters during operation.

Users can observe:

• Voltage

• Current

• Power

• Ah

• Charging status

• Output status

During DC motor and actuator testing, the real-time display allows technicians to observe changes in voltage, current, and power while the connected device is operating.

The display can help users monitor the electrical conditions of the device under test and observe changes when the motor or actuator is powered.

✦ High-Precision 4-Digit Display

The SPS3010C uses a 4-digit digital display for electrical parameter monitoring.

The display provides information including:

• Output voltage

• Output current

• Power

• Ah charging amount

The clear digital display makes it easier to observe electrical parameters during DC motor testing, actuator testing, and electrical troubleshooting.

✦ Precise Encoder Adjustment

The SPS3010C uses encoder controls for voltage and current adjustment.

The encoder adjustment system allows technicians to conveniently set the required voltage and current during DC motor testing, actuator evaluation, component testing, and electrical troubleshooting.

With:

• 10mV voltage setting resolution

• 1mA current setting resolution

users can make fine adjustments to the output parameters according to the requirements of the connected motor, actuator, or electrical load.

✦ USB-A & USB-C Fast Charging Output

In addition to the adjustable regulated DC output, the SPS3010C provides USB-A and USB-C charging ports for compatible USB devices.

The USB-A output supports:

• PE1.1/2.0

• Apple

• BC1.2

• AFC

• FCP

• QC2.0/QC3.0

The USB-C output supports:

• PE1.1/2.0

• Apple

• BC1.2

• AFC

• FCP

• QC2.0/QC3.0

• PD3.0

• PPS

The USB charging ports provide additional convenience at electronics and motor testing workstations when charging compatible portable electronic devices and accessories.

✦ Compact 300W Adjustable Bench Power Supply

The SPS3010C combines a 0–30V / 0–10A adjustable output with a maximum power rating of 300W, providing additional current capacity for compatible DC motors, actuators, solenoids, relays, fans, pumps, and other electrical loads.

The SPS3010C is suitable for electronics repair shops, electrical workshops, engineering workstations, laboratories, R&D environments, and motor testing benches.

The SPS3010C combines:

• Adjustable 0–30V output

• Adjustable 0–10A output

• 300W maximum power

• OCP protection

• Low-ripple regulated DC output

• Battery charging function

• Real-time voltage, current and power display

• Real-time Ah display

• High-precision 4-digit display

• Reverse polarity protection

• Overcharge protection

• Over-temperature protection

• Short-circuit alarm

• Automatic output shutdown after full charge

• USB-A fast charging

• USB-C fast charging

• Encoder adjustment

• Output ON/OFF control

It is particularly useful for testing:

• DC motors

• Linear actuators

• Solenoids

• Relays

• Fans

• Pumps

• Motor control circuits

• Actuator control circuits

• Electronic modules

• Electrical loads

• Battery-powered motors

• Battery-powered actuators

✦ Wide Range of Applications

The SPS3010C is designed for applications requiring adjustable and regulated DC power for motor testing, actuator testing, electrical troubleshooting, component evaluation, and repair, especially:

DC Motor & Actuator Testing

• DC motor functional testing

• DC motor power testing

• Motor operating condition verification

• Motor troubleshooting

• Linear actuator testing

• Actuator power testing

• Actuator operating condition verification

• Motor and actuator development testing

Solenoid, Relay & Electrical Load Testing

• Solenoid testing

• Relay testing

• Electromagnetic actuator testing

• Fan testing

• Pump testing

• Electrical load testing

• Low-voltage component testing

• Electrical troubleshooting

Motor & Actuator Troubleshooting

• Motor power input verification

• Actuator power input verification

• Abnormal current observation

• Motor connection testing

• Actuator wiring checks

• Electrical component troubleshooting

• Prototype motor testing

• Control circuit testing

Battery-Powered Motor & Actuator Testing

• Battery-powered motor testing

• Battery-powered actuator testing

• Rechargeable battery charging

• Battery charging condition monitoring

• Ah charging amount monitoring

• Battery-powered electronic system testing

• Charging circuit testing

• Battery maintenance

The SPS3010C provides adjustable regulated DC power, 300W power capability, OCP protection, low-ripple output, real-time electrical parameter monitoring, and battery charging protection to support DC motor testing, actuator testing, solenoid testing, relay testing, electrical load testing, motor troubleshooting, battery-powered motor testing, and laboratory applications.

✦ Quality Assurance & Customer Support

Each package includes:

1 × DC power supply

1 × output power cable

1 × input power cable

1 × user manual

1 × warranty card

All DC power supplies and accessories undergo inspection before shipment to ensure reliable quality. The SPS3010C has passed CE & FCC certification.

We provide professional after-sales service and technical support. If you have any questions about the SPS3010C 30V 10A adjustable bench power supply for DC motor and actuator testing, please feel free to contact us.

Technical Specifications

Why Choose KUAIQU SPS3010C?

For DC motor and actuator testing, technicians and engineers need an adjustable bench power supply that provides flexible voltage and current adjustment, sufficient power capacity, clear electrical parameter monitoring, and protection functions for different electrical loads.

The KUAIQU SPS3010C combines:

✓ 0–30V / 0–10A adjustable output

✓ 300W power capability

✓ Adjustable regulated DC output

✓ OCP protection

✓ Low-ripple DC output

✓ 10mV voltage setting/readback resolution

✓ 1mA current setting/readback resolution

✓ Real-time voltage, current and power display

✓ Real-time Ah accumulated charge display

✓ High-precision 4-digit display

✓ Reverse polarity protection

✓ Overcharge protection

✓ Over-temperature protection

✓ Short-circuit alarm

✓ Automatic output shutdown after full charge

✓ Dedicated battery charging function

✓ USB-A + USB-C fast charging

✓ Precision encoder adjustment

✓ Output ON/OFF control

Providing a practical testing solution for DC motor testing, actuator testing, solenoid testing, relay testing, fan and pump testing, electrical load testing, motor troubleshooting, actuator troubleshooting, battery-powered motor testing, battery-powered actuator testing, and laboratory electrical applications.