Click the link above to get the full user guide for this product.
KUAIQU SPS-C3206 LED Testing Power
Supply 0-32V 0-6A 192W with Voltage and
Current Display
The KUAIQU SPS-C3206 is a 0-32V, 0-6A, 192W Adjustable DC Power Supply for LED Testing and low-voltage lighting electronics. It is designed for bench testing of compatible LEDs, LED circuits, and LED modules where adjustable DC power and visible electrical readings are needed. The front panel combines 4-Knob Adjustment with Voltage Display, Current Display, Power Display, CV/CC operation, and an Output Switch for repeated LED test work.
Key Features
Adjustable Power Conditions for LED Evaluation
LED circuits can operate under different electrical conditions depending on their configuration and application. The SPS-C3206 provides 0-32V adjustable output and up to 0-6A current, giving users room to establish different test conditions for compatible LED devices and circuits.
With 192W rated output power, the power supply can be used for individual LED circuits, LED modules, and other compatible low-voltage lighting electronics that fall within its rated output range.
Voltage and Current Observation During LED Testing
The SPS-C3206 provides dedicated Voltage Display and Current Display so users can observe the electrical values of a connected LED circuit during operation.
For LED Testing, these readings make it easier to see the actual voltage applied to the circuit and the current drawn during a test. This is particularly useful when comparing different LED circuits or checking whether a module operates under its intended test conditions.
Power Display for Bench Test Monitoring
In addition to voltage and current readings, the SPS-C3206 provides Power Display for observing the displayed power value of the connected load.
When testing LED modules or assembled lighting circuits, users can monitor the power value together with voltage and current rather than relying only on the configured output settings. This provides additional information when checking the operating condition of the test circuit.
4-Knob Adjustment for Repeated LED Tests
The 4-Knob Adjustment interface provides direct control from the front panel, making it practical to change settings between different LED test conditions.
When several LED circuits or modules need to be tested one after another, users can adjust the required parameters directly at the power supply instead of navigating through a menu-based interface. This suits routine laboratory and electronics workbench testing.
CV/CC Modes for Different Test Conditions
The SPS-C3206 provides CV/CC operation for LED circuit testing. Constant Voltage and Constant Current operation give users different ways to establish the required output condition for compatible LED test setups.
This allows the same Adjustable DC Power Supply to be used across different LED testing tasks within its voltage, current, and power ratings.
Output Switch for Test Sequence Control
The Output Switch separates output activation from the adjustment process, allowing users to prepare the required settings before applying power to the connected LED circuit.
This is useful when connecting a new LED module, changing between test setups, or repeating a test sequence. The output can be controlled directly from the front panel during bench work.
USB 5V/2A Output for Workbench Accessories
A 5V/2A USB Output is also provided for compatible USB-powered accessories.
This auxiliary output can be used for suitable low-power USB devices around the LED testing workbench while the main adjustable output is dedicated to the LED circuit under test.
Applications
Individual LED Circuit Testing
The SPS-C3206 can be used to supply adjustable DC power to compatible LED circuits during laboratory and bench testing.
Users can establish the required test condition and observe voltage, current, and power readings while the LED circuit is operating within the rated capability of the power supply.
LED Module Evaluation
LED modules can contain multiple LEDs and supporting electronic components, making adjustable bench power useful during development and evaluation.
The SPS-C3206 provides adjustable output together with visible electrical readings, allowing users to examine the operating condition of compatible LED modules under different test settings.
LED Lighting Electronics Development
During development of low-voltage LED lighting electronics, engineers and technicians can use the SPS-C3206 as an Adjustable DC Power Supply for early-stage circuit testing.
The adjustable output, CV/CC operation, and front-panel displays provide the basic power control and monitoring needed for compatible lighting circuits within the rated output range.
Comparative Testing of LED Circuits
When different LED circuits or modules need to be evaluated under controlled bench conditions, the SPS-C3206 provides adjustable output settings and visible voltage, current, and power values.
This makes it practical to repeat tests with different compatible LED setups while keeping the power supply settings under direct front-panel control.
Quality Check and Terms of Service
-
Package includes: DC Power Supply *1, Output Power Cord *1, Input Power Cord *1, User Manual *1, Warranty Card *1.
-
Has passed CE & FCC Certification.
-
All DC power supplies and accessories are inspected before shipment to ensure good quality.
-
Customer support: Contact us with any questions, and we'll respond within 24 hours.
Technical Specifications
| Parameter |
Specification |
| Model |
SPS-C3206 |
| Product Type |
Adjustable DC Power Supply |
| Output Voltage |
0-32V |
| Output Current |
0-6A |
| Output Power |
192W |
| Operating Temperature |
0-40°C |
| Operating Mode |
CV/CC |
| Voltage Setting/Readback Resolution |
10mV |
| Current Setting/Readback Resolution |
1mA |
| Setting Accuracy, Current |
≤0.01% + 10mA |
| Readback Accuracy, Voltage |
≤0.05% + 10mV |
| Readback Accuracy, Current |
≤0.01% + 10mA |
| Load Regulation, Voltage |
≤0.3% + 10mV |
| Load Regulation, Current |
≤0.1% + 2.5mA |
| Line Regulation, Voltage |
≤0.01% + 2.5mV |
| Line Regulation, Current |
≤0.1% + 2.5mA |
| Ripple, Voltage |
≤100mVp-p / ≤15mVrms |
| Ripple, Current |
≤15mArms |
| Rise Time, No Load |
≤200ms |
| Rise Time, Full Load |
≤300ms |
| Fall Time, No Load |
≤20s |
| Fall Time, Full Load |
≤300ms |
| Dynamic Response Time |
≤200ms |
| Efficiency |
≥85% |
| Input Voltage |
AC 220V (AC 110V optional) |
| Adjustment |
4-Knob Adjustment |
| Display |
Voltage Display / Current Display / Power Display |
| Output Control |
Output Switch |
| USB Output |
5V/2A |
| Dimensions |
Approx. 22 × 8.5 × 15.5 cm |
| Net Weight |
Approx. 1.2 kg |
| Application |
LED Testing |
Why Choose NICE-POWER SPS-C3206?
The SPS-C3206 combines adjustable 0-32V output, up to 0-6A current, and 192W rated power with the monitoring functions needed for everyday LED Testing. Voltage Display and Current Display show the electrical conditions of the connected circuit, while Power Display provides an additional view of the load's displayed power value.
For LED circuits, LED modules, and compatible low-voltage lighting electronics, the SPS-C3206 provides direct front-panel adjustment, CV/CC operation, and an Output Switch in one bench-top DC Power Supply. This makes it suitable for repeated LED testing, module evaluation, and lighting electronics development within its rated output range.
