KUAIQU SPS-C3010S 30V 10A 300W DC

Bench Power Source with OCP for

Automotive Electronics Testing

The KUAIQU SPS-C3010S is a 30V 10A 300W DC Bench Power Source designed for Automotive Electronics Testing, low-voltage automotive circuits, electronic modules, and related development work. With a 0–30V output range, up to 10A current capacity, OCP, precise parameter adjustment, and real-time voltage, current, and power readings, it provides a practical DC source for controlled automotive electronics testing within its rated specifications.

Key Features

30V 10A 300W Output for Automotive Electronics Testing

The SPS-C3010S provides 0–30V DC output, up to 10A current, and 300W maximum power. This output capability provides a suitable power source for testing compatible automotive electronic circuits, modules, and low-voltage electrical devices within the rated range.

OCP for Automotive Electronics Test Protection

The built-in Over-Current Protection (OCP) helps protect the power supply when excessive current conditions occur. This is useful during automotive electronics testing, where different test circuits and electronic modules may have varying current requirements.

Precision Voltage and Current Adjustment

The V-COARSE, V-FINE, A-COARSE, and A-FINE controls provide flexible adjustment of output voltage and current. Users can quickly set the required range with coarse adjustment and make smaller changes with fine adjustment when evaluating different automotive electronic operating conditions.

HD 4-Digit Display for Real-Time Electrical Monitoring

The HD 4-Digit Display provides clear readings of voltage, current, and power during operation. This allows users to monitor the electrical parameters supplied to a test circuit or module and observe changes when test conditions are adjusted.

Independent Output Button for Controlled Power Application

The Independent Output Button allows users to control the DC output separately from parameter adjustment. The required voltage and current can be configured before output is enabled, making it convenient when connecting and testing automotive electronic modules.

Regulated DC Output for Consistent Testing

The SPS-C3010S provides regulated DC output with specified voltage ripple of ≤100mVp-p / ≤15mVrms and current ripple of ≤15mArms. Controlled output characteristics help provide consistent supply conditions when performing repeated tests on compatible automotive electronics.

Multiple Protection Functions

In addition to OCP, the SPS-C3010S includes Over-Voltage Protection, Over-Load Protection, Short Circuit Protection, Over-Temperature Protection, and Grounding Protection. These protection functions provide additional safeguards when abnormal electrical or operating conditions occur during testing.

USB and Type-C Charging Output

The integrated USB and USB Type-C outputs provide convenient charging for compatible devices used alongside automotive electronics testing equipment. The USB/Type-C output supports PDO profiles of 5V/3A, 9V/2A, and 12V/1.5A, as well as PPS output of 3.3V–5.9V/3A and 3.3V–11V/1.6A.

Applications

Automotive Electronic Module Testing

The SPS-C3010S can provide controlled DC power for compatible automotive electronic modules operating within its 30V, 10A, and 300W rated output range. Users can set the required supply conditions and monitor voltage, current, and power during testing.

Automotive Circuit Testing

The adjustable DC output can be used as a bench power source for compatible low-voltage automotive circuits during development, troubleshooting, and electrical verification.

Automotive Sensor and Electronic Device Testing

For compatible automotive sensors and electronic devices that require an external DC supply within the rated range, the SPS-C3010S provides adjustable power and real-time electrical parameter readings for test work.

Automotive Electronics Development

The Precision Encoder and coarse/fine voltage and current controls allow engineers to make controlled changes to power conditions when developing and evaluating automotive electronic circuits and modules.

Vehicle Electrical System Simulation

Within its 0–30V and 300W rated output capability, the SPS-C3010S can provide a controlled DC source for laboratory testing of compatible low-voltage automotive electronic circuits and devices.

Quality Check and Terms of Service:

Package Includes

Each KUAIQU SPS-C3010S DC Bench Power Source is packaged with the standard accessories required for normal operation.

CE & FCC Certification

The SPS-C3010S is designed to meet applicable CE and FCC requirements for its intended use.

Inspection Before Shipment

Each power supply undergoes inspection before shipment to help ensure proper operation and product quality.

Customer Support within 24 Hours

For questions about product operation, specifications, or usage, KUAIQU customer support provides assistance within 24 hours.

Technical Specifications

Why Choose KUAIQU SPS-C3010S?

The KUAIQU SPS-C3010S combines a 30V, 10A, 300W DC output with the control and monitoring functions needed for Automotive Electronics Testing. Its V-COARSE, V-FINE, A-COARSE, and A-FINE controls allow users to make controlled changes to voltage and current, while the HD 4-Digit Display provides clear voltage, current, and power readings during testing. OCP helps protect against excessive current conditions, while Over-Voltage, Over-Load, Short Circuit, Over-Temperature, and Grounding Protection provide additional protection during bench testing. With regulated DC output and USB/Type-C charging capability, the SPS-C3010S is a practical DC Bench Power Source for compatible automotive electronic modules, circuits, and devices.