KUAIQU SPPS-H605 48V System Testing

Regulated DC Power Supply 60V 5A 300W

with OVP Protection

The KUAIQU SPPS-H605 is a 60V 5A 300W Regulated DC Power Supply designed for 48V System Testing and controlled DC power verification. With a 0-60V adjustable output range and up to 5A output current, it provides adjustable DC power for testing 48V systems, DC-powered equipment, power modules, and related components within its rated operating range. OVP Protection and OCP Function provide additional protection during test operation, while the encoder knob, Output ON/OFF control, voltage and current readback, and USB 5V/2A Output support practical bench testing workflows.

For 48V System Testing, the SPPS-H605 allows users to set the output voltage around the required 48V test level and adjust the output according to the requirements of the device under test. Its 300W rated power, 10mV voltage setting and readback resolution, and 1mA current setting and readback resolution provide detailed control and monitoring for bench-based DC testing.

Key Features

0-60V Adjustable Output for 48V System Testing

The SPPS-H605 provides a 0-60V adjustable voltage range, 0-5A adjustable current range, and 300W rated power. This output range covers common 48V DC test requirements while also providing adjustment above and below 48V when a test procedure requires different voltage levels.

For 48V System Testing, users can set the required DC output voltage with the encoder knob and adjust the output current according to the connected equipment and test conditions, provided the operating requirements remain within the power supply's rated limits.

OVP Protection for Controlled DC Testing

The SPPS-H605 includes an OVP Function for over-voltage protection. This is useful when working with 48V equipment where controlling the applied DC voltage is an important part of the test procedure.

OVP Protection provides an additional protection function during controlled testing and helps users manage over-voltage conditions according to the configured protection settings.

OCP Function for 48V Equipment Testing

The built-in OCP Function provides over-current protection during DC power testing. When testing 48V systems, power modules, or DC-powered components, OCP can be used as part of a controlled test setup where output current needs to be monitored and protected.

The SPPS-H605 supports current adjustment from 0-5A, allowing users to configure the required test current within the power supply's rated output capability.

Encoder Knob Adjustment and Output ON/OFF Control

The encoder knob provides direct adjustment of the power supply settings during bench testing. The Output ON/OFF function allows users to enable or disable the DC output while keeping the configured settings available for the next test operation.

For repeated 48V System Testing, these controls can make it easier to adjust test conditions, start or stop output, and repeat measurements without repeatedly changing the basic setup.

Voltage and Current Readback for Test Monitoring

The SPPS-H605 provides voltage and current setting and readback functions with 10mV voltage resolution and 1mA current resolution. These readback functions allow users to monitor the displayed output conditions while testing 48V equipment.

The voltage setting and readback accuracy are specified at ≤0.01%+15mV, while the current setting and readback accuracy are specified at ≤0.01%+10mA. These specifications provide measurable performance information for users evaluating DC output during bench testing.

USB 5V/2A Output and Buzzer Mute Setting

The SPPS-H605 includes a 5V/2A USB output for compatible USB-powered devices used alongside the main DC test setup. The encoder knob also includes a buzzer function that can be set to mute according to the user's operating preference.

These functions provide additional convenience during bench-based 48V System Testing without changing the primary DC output function of the power supply.

Applications

48V System Testing

The SPPS-H605 is designed for testing DC systems and equipment operating around the 48V range. Its 0-60V adjustable output allows users to configure the required test voltage around 48V while the 0-5A current range supports different test load requirements within the 300W rated power limit.

It can be used as a Regulated DC Power Supply for controlled power-up, output verification, and operating checks of compatible 48V DC equipment.

48V Power Module Testing

Power modules designed for 48V systems can be evaluated using the SPPS-H605 as an adjustable DC test source. Users can configure the output voltage and current according to the module's test requirements and monitor voltage and current readback during operation.

OVP Protection and OCP Function provide additional protection functions for controlled testing procedures.

48V DC Equipment Verification

The SPPS-H605 can provide adjustable DC input power for compatible 48V equipment and components during bench verification. The 0-60V voltage range allows users to test at 48V as well as at other voltage points required by the test procedure.

The Output ON/OFF function also allows the DC output to be controlled during repeated verification steps.

DC Input and Power-Up Testing

For equipment that requires a controlled DC input during power-up testing, the SPPS-H605 provides an adjustable DC output that can be configured within its 0-60V and 0-5A ranges.

Users can monitor voltage and current readback while applying power to the device under test, making the power supply suitable for controlled bench testing of compatible DC-powered equipment.

48V Control Circuit and Component Testing

The adjustable output of the SPPS-H605 can be used as a DC test source for compatible control circuits and components that operate within the supply's rated output range.

The encoder knob provides direct adjustment of the output settings, while OVP and OCP provide additional protection functions during controlled test procedures.

Quality Check and Terms of Service:

Each KUAIQU SPPS-H605 Regulated DC Power Supply is inspected before shipment to help ensure that the product and its basic functions meet the specified requirements.

Package Includes:

• 1 × SPPS-H605 DC Bench Power Supply

• 1 × Output Test Lead

• 1 × AC Power Cord

• 1 × User Manual

• 1 × Warranty Card

Quality Assurance:

• CE & FCC Certification

• Inspection before shipment

• Customer support within 24 hours

Packaging Information:

• Single Unit Size: 31×12.5×22cm

• Single Unit Weight: 1.72KG

• Carton Quantity: 8 Units per Carton

Technical Specifications

Why Choose KUAIQU SPPS-H605?

The KUAIQU SPPS-H605 combines a 0-60V adjustable output, 0-5A current range, and 300W rated power in a compact Regulated DC Power Supply for 48V System Testing. Its OVP Protection and OCP Function provide dedicated protection functions for controlled DC testing, while the encoder knob and Output ON/OFF control support repeated test setup and operation.

For engineers and technicians working with 48V DC equipment, the SPPS-H605 provides adjustable voltage and current control together with voltage and current readback, 10mV voltage resolution, 1mA current resolution, and 5V/2A USB output. These specifications and functions make it a practical bench power source for 48V system verification, power module testing, DC equipment testing, and other compatible DC test applications within its rated 60V, 5A, and 300W output capability.