KUAIQU R-SPS6020C 60V 20A 1200W

DC Source with 4-Digit Display

for Industrial Equipment Testing

The KUAIQU R-SPS6020C is a 60V 20A 1200W DC Source with 4-Digit Display designed for Industrial Equipment Testing. With an adjustable output of 0–60V, up to 20A current, and 1200W maximum power, it provides flexible DC power for testing compatible industrial equipment, electronic modules, and DC-powered devices.

The R-SPS6020C combines high-power adjustable output with precision encoder adjustment, real-time voltage/current/power display, OCP, and M1–M3 memory. These functions help users configure test conditions, monitor electrical parameters, and repeat commonly used settings during industrial equipment evaluation and testing.

Key Features

0–60V 20A 1200W DC Source for Industrial Equipment Testing

The R-SPS6020C provides a 0–60V adjustable voltage output, up to 20A current, and 1200W maximum power.

For Industrial Equipment Testing, different devices may require different DC input conditions. The wide voltage range allows users to configure the required supply voltage, while the 20A current capability provides higher-current output for compatible industrial equipment within the rated specifications.

The 1200W output capability also makes this DC Source suitable for testing industrial DC equipment that requires more power than standard low-power bench supplies.

Adjustable Output for Different Industrial Test Conditions

Industrial equipment may need to be evaluated under different DC supply conditions during development, maintenance, troubleshooting, or performance verification.

The R-SPS6020C allows users to adjust voltage and current within the 0–60V / 0–20A range, providing flexible power conditions for compatible equipment.

The precision encoder adjustment allows controlled changes to voltage and current settings when users need to evaluate equipment under different operating conditions.

4-Digit Display for Real-Time Parameter Monitoring

The R-SPS6020C features a 4-Digit Display for real-time monitoring of voltage, current, and power.

During Industrial Equipment Testing, users can observe the electrical parameters supplied to the connected equipment while adjusting or maintaining the test conditions.

Real-time parameter visibility helps users check power consumption and monitor changes during equipment operation.

OCP for Industrial DC Equipment Testing

The built-in OCP (Over Current Protection) provides an additional protection function when excessive current conditions occur.

When testing compatible industrial DC equipment, unexpected current demand may occur during operation or troubleshooting. OCP helps protect the power supply and connected equipment under excessive current conditions.

This provides useful protection support for high-current industrial test applications within the rated output range.

M1–M3 Memory for Repeated Test Settings

The R-SPS6020C provides M1–M3, 3 Groups of Memory Function, allowing commonly used voltage and current settings to be stored and recalled.

For repeated Industrial Equipment Testing, users may need to apply the same test conditions to multiple units or return to previously used settings.

The memory function helps reduce repeated manual adjustment and makes commonly used test parameters easier to recall.

Precision Encoder for Controlled Adjustment

The precision encoder provides convenient adjustment of voltage and current settings.

When evaluating industrial equipment at different supply levels, users can change the output parameters directly through the encoder and establish the required test conditions within the rated specifications.

This provides practical control for equipment development, testing, and troubleshooting.

Front & Rear Dual Output Ports

The R-SPS6020C provides both front-panel and rear-panel output ports for flexible connection to different test setups.

The front-panel output supports applications below 5A, making it suitable for lower-current industrial equipment testing and setup work.

The rear output can be used at full rated power, providing access to the complete 1200W output capability when higher-current industrial DC equipment requires greater power.

Panel Lock & Adjustable Buzzer

The Panel Lock Button helps prevent unintended changes to voltage and current settings after the desired test parameters have been configured.

The control knob also provides buzzer feedback, and the buzzer can be muted when quieter operation is preferred.

These functions provide additional convenience during extended industrial equipment testing procedures.

Applications

Industrial DC Equipment Testing

The R-SPS6020C provides adjustable DC power for Industrial Equipment Testing, allowing users to configure different voltage and current conditions for compatible industrial DC equipment.

The 0–60V / 0–20A / 1200W output provides flexibility for testing equipment with different power requirements, while the 4-digit display allows users to monitor voltage, current, and power in real time.

Industrial Equipment Evaluation

The adjustable DC Source can be used to evaluate compatible industrial equipment under different supply conditions.

Users can adjust the voltage and current according to the test requirements and observe the electrical parameters during equipment operation.

The precision encoder supports controlled parameter adjustment when comparing equipment behavior at different DC input conditions.

Industrial Control Equipment Testing

The R-SPS6020C can provide adjustable DC power for compatible industrial control equipment and electronic modules.

The 4-Digit Display provides real-time voltage, current, and power information, while the M1–M3 Memory Function allows frequently used test settings to be recalled for repeated testing.

Industrial DC Equipment Troubleshooting

The adjustable output provides a practical DC source when troubleshooting compatible industrial electronic equipment and DC-powered devices.

Users can establish different voltage and current conditions and monitor the power supply's real-time output parameters during testing.

The OCP function provides additional protection support when excessive current conditions occur within compatible test applications.

Repeated Industrial Testing

For testing multiple units or repeating the same evaluation procedure, the M1–M3 memory groups allow commonly used voltage and current settings to be stored and recalled.

This can simplify repeated testing procedures and reduce the need for manual parameter adjustment between tests.

Quality Check and Terms of Service:

• Package includes: DC Power Supply ×1, Output Power Cord ×1, Input Power Cord ×1, User Manual ×1, Warranty Card ×1.

• Has passed CE & FCC Certification.

• All DC power supplies and accessories are inspected before shipment to ensure good quality.

• Customer support: Contact us with any questions, and we'll respond within 24 hours.

Technical Specifications

Why Choose R-SPS6020C?

The KUAIQU R-SPS6020C 60V 20A 1200W DC Source with 4-Digit Display for Industrial Equipment Testing combines high-power adjustable DC output with practical monitoring, adjustment, protection, and memory functions.

For Industrial Equipment Testing, it provides:

1. 0–60V adjustable voltage output

2. Up to 20A current and 1200W maximum power

3. 4-Digit voltage/current/power display

4. Precision encoder adjustment

5. OCP (Over Current Protection)

6. M1–M3, 3 Groups of Memory Function

7. Front and rear dual output ports

8. Rear output supports full rated power

9. Panel Lock Button

10. Adjustable buzzer with mute function

With its 60V adjustable output, 20A high-current capability, and 1200W maximum power, the R-SPS6020C provides flexible DC power for compatible Industrial DC Equipment Testing applications.

The combination of real-time parameter monitoring, precision adjustment, OCP, memory presets, and flexible output connections makes it a practical DC Source for industrial equipment evaluation, control equipment testing, troubleshooting, and repeated DC power testing within its rated specifications.