Click the link above to get the full user guide for this product.
Industrial DC Equipment Testing KUAIQU
High Power Bench Supply 60V 20A 1200W
R-SPS6020S with OCP
The KUAIQU R-SPS6020S is a 60V 20A 1200W High Power Bench Supply designed for Industrial DC Equipment Testing. With a 0–60V adjustable output, up to 20A current capacity, and 1200W maximum power, it provides adjustable DC power for compatible industrial equipment, DC modules, control circuits, and engineering test setups. Real-time voltage, current, and power display, OCP and OVP protection, memory presets, panel lock, and Output ON/OFF control support practical and repeatable industrial testing. The R-SPS6020S is part of KUAIQU's R-SPS-S high-power series.
Key Features
60V 20A 1200W High Power Bench Supply
The R-SPS6020S combines a 0–60V adjustable output, 0–20A current range, and 1200W maximum power in one high-power bench supply. This capacity is suitable for industrial DC equipment testing where the test setup requires more current and power than a conventional low-power bench supply can provide.
Adjustable DC Output for Industrial Equipment Testing
The adjustable DC output allows users to establish different voltage and current conditions for compatible industrial DC equipment, modules, and circuits. This makes it possible to use the same power source across different test configurations within its rated operating range.
High Current Capacity for DC Equipment
With up to 20A of output current, the R-SPS6020S can support industrial test setups that require higher current. The 1200W capacity provides additional output headroom for compatible high-power DC equipment and test loads.
Four-Digit Voltage, Current, and Power Display
The four-digit display provides direct readback of voltage, current, and power during operation. This allows engineers and technicians to monitor the electrical conditions of the connected industrial DC equipment while testing.
Precision Encoder Adjustment
The encoder provides convenient adjustment of voltage and current settings. Users can fine-tune the DC output according to the requirements of different industrial equipment and test conditions.
OCP Protection for High Current Testing
Built-in Over Current Protection helps control excessive current conditions during industrial DC equipment testing. This is particularly useful when working with higher-current test setups.
OVP Protection for Controlled DC Testing
Over Voltage Protection helps prevent excessive voltage from being applied to connected equipment when establishing or adjusting test conditions.
Memory Presets for Repeated Testing
The M1-M3 memory presets provide three groups for storing frequently used voltage and current settings. When the same industrial DC equipment needs to be tested repeatedly, saved settings can make test preparation more convenient.
Output ON/OFF Control
Output ON/OFF control allows the DC output to be enabled or disabled directly from the front panel. This is useful when changing test connections or checking equipment without repeatedly disconnecting the power supply.
Panel Lock for Consistent Test Settings
The panel lock helps prevent unintended changes to established voltage and current settings. This can be useful when maintaining consistent parameters during repeated industrial equipment testing.
Front and Rear Output Connections
The R-SPS6020S provides front and rear output connections for different installation and testing arrangements. The front output is intended for lower-current use, while the rear output can be used for the unit's full power capability.
USB and Optional RS232/RS485 Communication Interfaces
The R-SPS-S series supports a standard USB interface, with RS232 and RS485 available as options. These interfaces provide communication connection options for compatible industrial test equipment and system integration.
Applications
Industrial DC Equipment Testing
Provides adjustable DC power for testing compatible industrial equipment that operates within the 0–60V and 0–20A output range.
Industrial Equipment Power Testing
Can be used to establish controlled DC power conditions when evaluating the electrical operation of compatible industrial equipment.
Industrial DC Module Testing
Suitable for supplying adjustable DC input conditions to industrial modules during engineering development and bench testing.
Industrial Control Circuit Testing
Provides adjustable voltage and current for compatible DC control circuits and related electronic assemblies during laboratory or engineering testing.
High Power Industrial DC Testing
The 1200W maximum output provides additional capacity for industrial test setups that require higher DC power within the rated operating range.
Industrial Equipment Operating Condition Testing
Adjustable voltage and current allow users to establish different DC supply conditions when evaluating how compatible equipment operates under different input settings.
Industrial Prototype Evaluation
The R-SPS6020S can serve as an adjustable DC source during prototype development and evaluation of compatible industrial electronic equipment.
Repeated Industrial Equipment Testing
M1-M3 memory presets allow frequently used test parameters to be recalled, helping simplify repeated testing where the same or similar DC conditions are required.
High Current DC Equipment Testing
The 20A current capability supports industrial test setups that require higher current output, subject to the rated operating conditions of the connected equipment.
Laboratory and Engineering DC Testing
The combination of adjustable output, real-time electrical readback, protection functions, output control, and memory presets makes the R-SPS6020S suitable for laboratory and engineering bench testing of compatible industrial DC equipment.
Quality Check and Terms of Service:
-
Package includes: DC Power Supply *1, Output Power Cord *1, Input Power Cord *1, User Manual *1, Warranty Card *1.
-
Has passed CE & FCC Certification.
-
All DC power supplies and accessories are inspected before shipment to ensure good quality.
-
Customer support: Contact us with any questions, and we'll respond within 24 hours.
Technical Specifications
| Parameter |
Specification |
| Model |
R-SPS6020S |
| Product Type |
High Power Bench Supply |
| Rated Voltage |
0–60V |
| Rated Current |
0–20A |
| Rated Power |
1200W |
| Load Regulation Voltage |
≤0.1% + 10mV |
| Load Regulation Current |
≤0.1% + 2.5mA |
| Line Regulation Voltage |
≤0.01% + 2.5mV |
| Line Regulation Current |
≤0.1% + 2.5mA |
| Setting Resolution Voltage |
10mV |
| Setting Resolution Current |
10mA |
| Readback Resolution Voltage |
10mV |
| Readback Resolution Current |
10mA |
| Setting Accuracy Voltage |
≤0.05% + 10mV |
| Setting Accuracy Current |
≤0.01% + 10mA |
| Readback Accuracy Voltage |
≤0.05% + 10mV |
| Readback Accuracy Current |
≤0.01% + 10mA |
| Voltage Ripple |
≤400mVp-p / ≤60mVrms |
| Current Ripple |
≤20mArms |
| Rise Time No Load |
≤150ms |
| Rise Time Full Load |
≤200ms |
| Fall Time No Load |
≤15s |
| Fall Time Full Load |
≤50ms |
| Dynamic Response |
≤20ms |
| Efficiency |
≥85% |
| Display |
Four-Digit Voltage, Current, and Power Display |
| Protection |
OCP and OVP |
| Memory |
M1-M3 Memory Presets |
| Output Control |
Output ON/OFF |
| Communication Interface |
USB; Optional RS232/RS485 |
| Output Connection |
Front and Rear Output Connections |
| Front Output |
<5A |
| Rear Output |
Full Power Output |
| Panel Lock |
Yes |
| Rated Test Environment |
0°C–40°C |
| Product Size |
Approx. 26.5 × 19 × 8.5 cm |
| Net Weight |
Approx. 2.5 kg |
| Package Size |
Approx. 38 × 24.5 × 12.5 cm |
| Package Weight |
Approx. 3.2 kg |
| Carton Quantity |
6 pcs/carton |
The official KUAIQU product information confirms the R-SPS6020S as a 0–60V, 0–20A, 1200W model and lists the series' voltage/current/power display, memory presets, panel lock, OCP, OVP, USB, optional RS232/RS485, and rear high-power output functions.
Why Choose KUAIQU R-SPS6020S?
For Industrial DC Equipment Testing, the R-SPS6020S combines a wide 0–60V adjustable output range with 20A current capability and 1200W maximum power. This gives engineers and technicians a higher-power DC source for compatible industrial equipment, modules, circuits, and test setups without changing between multiple lower-power supplies.
During testing, the four-digit display provides direct visibility of voltage, current, and power, while the precision encoder makes it convenient to establish the required output conditions. OCP and OVP provide protection for controlled DC testing, and Output ON/OFF control makes it easier to manage the power applied to the connected equipment.
For repeated industrial tests, M1-M3 memory presets can store frequently used settings, while the panel lock helps maintain established parameters. Front and rear output connections provide flexibility for different bench arrangements, and USB with optional RS232/RS485 interfaces provides additional communication options for compatible test systems.
Overall, the KUAIQU 60V 20A 1200W R-SPS6020S High Power Bench Supply combines adjustable DC output, high current capacity, high power capability, monitoring, protection, memory presets, and output control for Industrial DC Equipment Testing.