Click the link above to get the full user guide for this product.
Electroplating Processes with NICE-POWER
R-SPS15100 0-100A 0-15V 1500W High-Current DC
Power Supply
Key Features
100A Output for Compatible Electroplating Setups
The NICE-POWER R-SPS15100-R provides an adjustable DC output from 0–15V, with a maximum output current of 100A and rated output power of 1500W. This high-current, low-voltage output can supply compatible electroplating experiments and electrochemical setups when their electrical requirements fall within the power supply's ratings. Before use, confirm the required bath voltage, operating current, electrode arrangement, and total power demand to ensure the application is suitable for this model.
Constant Voltage and Constant Current Operation
The R-SPS15100-R supports Constant Voltage (CV) and Constant Current (CC) operating modes, with corresponding indicators on the front panel. These modes allow users to select the supply's operating condition according to the requirements of the connected process setup. For applications that require controlled plating current, users must establish appropriate settings and monitor the process using the relevant operating procedure and external instruments where necessary.
Manual Output Adjustment for Process Setup
The front-panel encoder knob allows users to adjust voltage and current settings when preparing an electroplating experiment. The output ON/OFF control helps manage power delivery during setup, electrode connection checks, and changes to the work arrangement. These controls support manual configuration of the DC supply; they do not imply automatic plating cycles, programmable current ramps, or built-in process timing.
Output Displays for Supply Monitoring
The four-digit voltage and current display provides visible output readings, while the power display shows output power information during operation. These readings help users observe the electrical output supplied to a compatible electrochemical setup. They do not measure plating thickness, coating uniformity, bath chemistry, electrode condition, or the quality of the deposited metal.
Communication Interfaces for Connected Process Setups
The R-SPS15100-R variant is intended for applications that require communication connectivity and is equipped with USB, RS-232, and RS-485 interfaces, subject to the supplied configuration. These interfaces may be useful when connecting the power supply to compatible external equipment. Verify the communication protocol and software compatibility before integration; the interfaces alone do not provide automatic electroplating control or process-monitoring capability.
Applications
Electroplating Bath Power Supply
Use the R-SPS15100-R as a DC source for compatible electroplating setups that require low voltage and high current. The adjustable output can be configured to match the documented electrical requirements of the plating bath and electrode arrangement. Confirm the process voltage, required current, current distribution, and power demand before connecting the electrodes. The suitability of this supply depends on the specific plating chemistry, process conditions, and required operating duration.
Plating Process Parameter Evaluation
During laboratory process development, users may need to investigate how a selected electrical supply condition affects an electroplating process. The R-SPS15100-R can provide manually configured DC voltage and current conditions within its output ratings. Users must monitor the process using suitable external instruments and established procedures; the power supply does not independently measure coating thickness, deposition rate, surface finish, or plating uniformity.
Electrochemical Cell Experiments
The R-SPS15100-R can serve as a DC source for compatible electrochemical cell experiments that require low-voltage, high-current input. Before connecting a cell, verify the cell's voltage and current requirements, electrode configuration, polarity, and operating limits. The CV/CC modes support the selection of the supply's operating condition, while evaluation of electrochemical reactions, electrolyte composition, and electrode performance requires separate methods and instrumentation.
Electroplating Equipment Integration and Bench Setup
For an electroplating development bench, the R-SPS15100-R can provide DC power to a compatible process setup containing the bath, electrodes, wiring, and appropriate measurement equipment. The front-panel encoder and output ON/OFF control support manual supply configuration during preparation and testing. Check cable and connector current ratings, polarity, grounding, environmental conditions, and the electrical requirements of the process equipment before energizing the setup.
Quality Check and Terms of Service:
-
Package Includes: DC Power Supply × 1, Output Power Cord × 1, Input Power Cord × 1, User Manual × 1, Warranty Card × 1.
-
Certifications: Has passed CE & FCC Certification.
-
Quality Inspection: All DC power supplies and accessories are inspected before shipment to ensure good quality.
-
Customer Support: Contact us with any questions, and we'll respond within 24 hours.
Technical Specifications
| Parameter |
Specification |
| Model |
R-SPS15100-R |
| Product Type |
High-Current Regulated DC Power Supply |
| Rated Output Power |
1500W |
| Output Voltage |
0–15V |
| Output Current |
0–100A |
| Load Regulation — Voltage |
≤0.1% + 10mV |
| Load Regulation — Current |
≤0.1% + 2.5mA |
| Line Regulation — Voltage |
≤0.01% + 2.5mV |
| Line Regulation — Current |
≤0.1% + 2.5mA |
| Voltage Setting Resolution |
10mV |
| Current Setting Resolution |
10mA |
| Voltage Readback Resolution |
10mV |
| Current Readback Resolution |
10mA |
| Voltage Setting Accuracy |
≤0.05% + 10mV |
| Current Setting Accuracy |
≤0.01% + 10mA |
| Voltage Readback Accuracy |
≤0.05% + 10mV |
| Current Readback Accuracy |
≤0.01% + 10mA |
| Voltage Ripple (20Hz–20MHz) |
≤3500mVp-p / ≤1200mVrms |
| Current Ripple (20Hz–20MHz) |
≤200mArms |
| Rise Time, No Load |
≤100ms |
| Rise Time, Full Load |
≤150ms |
| Fall Time, No Load |
≤35s |
| Fall Time, Full Load |
≤50ms |
| Dynamic Response |
≤20ms |
| Efficiency |
≥85% |
| Communication Interfaces |
USB, RS-232, and RS-485, subject to supplied configuration |
| Operating Temperature |
0°C–40°C |
| Approximate Product Dimensions |
33 × 27 × 9cm |
| Approximate Net Weight |
3.7kg |
Why Choose NICE-POWER R-SPS15100-R?
Electroplating experiments and electrochemical development can require low-voltage DC power with substantial current capacity. The NICE-POWER R-SPS15100-R offers an adjustable 0–15V output, a maximum current of 100A, and rated output power of 1500W for compatible setups within these limits.
Its CV/CC operating modes, front-panel encoder, output ON/OFF control, and voltage, current, and power displays support manual supply configuration and observation during process development. USB, RS-232, and RS-485 interfaces provide connectivity options for compatible external equipment where communication is required.
Before selecting this model for an electroplating process, verify the required current density, bath voltage, electrode arrangement, process duration, and total power demand. Confirm that the power supply is suitable for the actual operating environment and duty cycle. The R-SPS15100-R supplies DC power; it does not independently regulate plating thickness, analyze bath chemistry, or monitor coating quality. Appropriate process controls and external measurement methods are required for those functions.
