Click the link above to get the full user guide for this product.
60V 0-5A Dual Channel DC Lab Power Supply
KUAIQU SPPS605-2KD for Electrochemical Cell
Research Testing
Dual Channel Precision DC Power Supply for Electrochemical Cell Research
The SPPS605-2KD Dual Channel DC Power Supply is designed to provide adjustable DC power for electrochemical cell research, laboratory power experiments, and DC-powered material evaluation setups. It features two independent output channels, each supporting 0–60V, 0–5A, and up to 300W, allowing researchers to establish separate DC voltage and current conditions for compatible electrochemical cells and experimental circuits.
For experiments requiring different electrical configurations, the power supply supports Independent, Series, and Parallel Output modes. Series Output provides up to 0–120V, 0–5A, and 600W, while Parallel Output provides up to 0–60V, 0–10A, and 600W. The negative-to-zero-to-positive voltage output mode provides an additional polarity-related configuration for suitable experimental arrangements.
Two versions are available: the SPPS605-2KD basic version for front-panel operation and the SPPS605R-2KD programmable version with a communication interface. Both versions provide precision encoder adjustment, OCP and OVP protection, Output ON/OFF control, and 8-Group Memory, supporting flexible DC power configurations for laboratory experiments and repeated electrical evaluation.
Key Features
1. Dual Independent DC Outputs for Electrochemical Experiments
Each channel provides adjustable output from 0–60V and 0–5A, with a maximum power of 300W. The two independent outputs allow researchers to supply separate experimental circuits or establish different voltage and current conditions for two compatible cells or test arrangements.
2. Series Output up to 120V
The Series Output mode combines the two channels to provide up to 0–120V, 0–5A, and 600W. This configuration offers a higher DC voltage range for compatible electrochemical experimental setups that require a voltage above the individual channel limit.
3. Parallel Output up to 10A
The Parallel Output mode provides up to 0–60V, 0–10A, and 600W. This configuration is suitable for compatible low-voltage laboratory loads and electrochemical experiments requiring a higher current supply within the rated power range.
4. Fine Voltage and Current Setting Resolution
The precision encoder allows controlled adjustment of output voltage and current. With 10mV voltage setting resolution and 1mA current setting resolution, researchers can establish detailed electrical input conditions for different experimental requirements.
5. Output Readback for Electrical Condition Monitoring
The power supply provides voltage and current readback with 10mV and 1mA resolution respectively. The displayed electrical readings help users monitor the DC power source's output conditions during laboratory experiments.
6. Negative-to-Zero-to-Positive Voltage Output
The SPPS605-2KD supports Negative Voltage–0–Positive Voltage output mode. This provides a polarity-related configuration for suitable electrochemical experimental arrangements that require different DC voltage polarities. Actual polarity and wiring conditions should follow the experimental protocol and cell specifications.
7. OCP and OVP Protection
Over Current Protection (OCP) and Over Voltage Protection (OVP) are available across Independent, Series, and Parallel output modes. These protection functions help reduce the risk of excessive current or voltage conditions during DC power experiments.
8. Output ON/OFF Control
The Dual Channel, Series, and Parallel modes support Output ON/OFF control. Researchers can switch the output on or off during experimental preparation, cell connection, and test configuration changes.
9. 8-Group Memory for Repeated Laboratory Experiments
The power supply provides eight memory groups:
-
CH1: 2 groups
-
CH2: 2 groups
-
Series Mode: 2 groups
-
Parallel Mode: 2 groups
Commonly used voltage and current settings can be stored and recalled for repeated experimental conditions and comparative evaluation procedures.
10. Dedicated Series-Parallel Output Port
The dedicated Series-Parallel Output Port provides a connection point for combined output configurations without complicated external wiring. The One-Key Series/Parallel mode button makes it convenient to change between supported output arrangements.
11. Panel Lock with Buzzer
The Panel Lock Function helps prevent unintended changes to output settings during laboratory operation. The built-in buzzer provides an audible indication during panel operation.
12. Basic and Programmable Version Options
The SPPS605-2KD is the basic version without communication-based programmable control. The SPPS605R-2KD is the programmable version with a communication interface for compatible laboratory control arrangements. The actual interface configuration should be confirmed before ordering.
Applications
Electrochemical Cell DC Power Supply Testing
Provides adjustable DC voltage and current for compatible electrochemical cell experiments that require an external DC power source. Researchers can establish electrical input conditions according to the cell specifications and experimental requirements.
Dual Cell Comparative Experiments
The two independent output channels allow separate voltage and current settings to be established for two compatible experimental circuits. This is useful for comparative evaluation under different electrical supply conditions.
High Current Electrochemical Experimental Setups
The Parallel Output mode provides up to 60V, 10A, and 600W for compatible low-voltage experimental loads requiring a higher current supply. Researchers should select the output configuration according to the cell and test circuit ratings.
High Voltage Laboratory DC Experiments
The Series Output mode provides up to 120V, 5A, and 600W. It can supply compatible experimental circuits that require a higher DC voltage than a single output channel can provide.
Polarity-Dependent Electrochemical Experiments
The Negative Voltage–0–Positive Voltage output mode offers an additional polarity-related configuration for suitable laboratory arrangements. Researchers should follow the cell specifications and experimental protocol when configuring output polarity.
Electrochemical Material Research Support
Provides adjustable DC power for compatible material evaluation setups where a controlled electrical supply is required. The voltage and current readback helps monitor the power source's electrical output conditions during experiments.
Repeated Laboratory Power Experiments
The 8-Group Memory Function allows commonly used voltage and current settings to be stored and recalled. Precision encoder adjustment and Output ON/OFF control support repeated experimental procedures with established DC power conditions.
Laboratory DC Circuit and Cell Assembly Evaluation
The independent, Series, and Parallel output modes provide different power configurations for compatible DC circuits, cell assemblies, and experimental equipment used in electrochemical research environments.
Quality Check and Terms of Service:
-
Package includes: DC Power Supply ×1, Output Power Cord ×1, Input Power Cord ×1, User Manual ×1, and Warranty Card ×1.
-
The supplied product information states CE and FCC certification. Please confirm the applicable certificates for the selected version.
-
All DC power supplies and accessories are inspected before shipment.
-
Customer support is available for product configuration and technical questions.
-
Please confirm the electrochemical cell's voltage, current, polarity, and power requirements before connecting it to the power supply.
-
Ensure that the selected Independent, Series, or Parallel output mode is appropriate for the experimental setup.
-
For experiments requiring precise electrochemical potential control, impedance measurement, or electrochemical signal analysis, use appropriate dedicated electrochemical instrumentation.
-
Confirm the communication interface configuration when selecting the SPPS605R-2KD programmable version.
Technical Specifications
Output Ratings
| Parameter |
Specification |
| Product Model Options |
SPPS605-2KD Basic Version / SPPS605R-2KD Programmable Version |
| Product Type |
Dual Channel DC Laboratory Power Supply |
| Independent Output |
0–60V, 0–5A, 300W × 2 |
| Series Output |
0–120V, 0–5A, 600W |
| Parallel Output |
0–60V, 0–10A, 600W |
| USB Output |
5V, 2A |
| Output Modes |
Independent, Series, Parallel |
| Output Control |
Output ON/OFF for Dual Channel, Series, and Parallel Modes |
| Series/Parallel Control |
One-Key Series/Parallel Mode |
| Series/Parallel Output Port |
Dedicated Output Port |
| Output Voltage Mode |
Negative Voltage–0–Positive Voltage |
Setting and Readback Specifications
| Parameter |
Specification |
| Voltage Setting Resolution |
10mV |
| Current Setting Resolution |
1mA |
| Voltage Readback Resolution |
10mV |
| Current Readback Resolution |
1mA |
| Voltage Setting Accuracy |
≤0.01% + 15mV |
| Current Setting Accuracy |
≤0.01% + 10mA |
| Voltage Readback Accuracy |
≤0.01% + 15mV |
| Current Readback Accuracy |
≤0.01% + 10mA |
Regulation and Ripple
| Parameter |
Specification |
| Load Regulation – Voltage |
≤0.3% + 10mV |
| Load Regulation – Current |
≤0.1% + 2.5mA |
| Line Regulation – Voltage |
≤0.01% + 2.5mV |
| Line Regulation – Current |
≤0.1% + 2.5mA |
| Voltage Ripple – Independent Mode |
≤200mVp-p, ≤25mVrms |
| Voltage Ripple – Series/Parallel Mode |
≤300mVp-p, ≤40mVrms |
| Current Ripple – Independent Mode |
≤20mArms |
| Current Ripple – Series/Parallel Mode |
≤35mVrms (as printed in the source specification; unit confirmation recommended) |
| Ripple Measurement Frequency Range |
20Hz–20MHz |
Response and General Specifications
| Parameter |
Specification |
| Rise Time – No Load |
≤200ms |
| Rise Time – Full Load |
≤300ms |
| Fall Time – No Load |
≤20s |
| Fall Time – Full Load |
≤300ms |
| Dynamic Response |
≤200ms |
| Efficiency |
≥85% |
| Input Voltage / Current |
110V / 8A; 220V / 5A |
| Protection Functions |
OCP, OVP |
| Memory Function |
8 Groups |
| Memory Allocation |
CH1: 2 Groups; CH2: 2 Groups; Series: 2 Groups; Parallel: 2 Groups |
| Panel Lock |
Yes, with Buzzer |
| Adjustment |
Precision Encoder Adjustment |
| Rated Operating Temperature |
0°C–40°C |
| Product Dimensions |
Approx. 24 × 12.5 × 13cm |
| Net Weight |
Approx. 2.75kg |
| Package Dimensions |
Approx. 38.5 × 23.5 × 20cm |
| Package Weight |
Approx. 3.4kg |
| Carton Quantity |
4 pcs/carton |
Version and Communication Options
| Version |
Description |
| SPPS605-2KD |
Basic version without communication-based programmable control; supports front-panel operation and 8-Group Memory |
| SPPS605R-2KD |
Programmable version with communication interface |
| Communication Interface Configuration |
USB / RS-232 / RS-485 options; confirm the actual interface configuration before ordering |
Important Notes:
-
The independent output range is 0–60V and 0–5A per channel.
-
Series Output provides up to 120V, 5A, and 600W.
-
Parallel Output provides up to 60V, 10A, and 600W.
-
The detailed specification table lists 10mV voltage resolution and 1mA current resolution.
-
The listed input voltage/current specifications are 110V/8A and 220V/5A. Confirm the required input configuration before ordering.
-
The Series/Parallel current ripple value is printed as ≤35mVrms in the source image; confirm the unit before publication.
-
This equipment is an adjustable DC power supply, not a dedicated potentiostat, galvanostat, battery cycler, or electrochemical workstation.
-
Product weight and electrical output accuracy should be checked against the selected configuration before purchase.
Why Choose the SPPS605 Dual Channel DC Laboratory Power Supply?
Electrochemical research setups can require different DC voltage, current, and polarity conditions depending on the cell configuration and experimental procedure. The SPPS605 provides two independent 60V, 5A channels, giving researchers flexibility when supplying separate experimental circuits.
For experiments requiring higher voltage or current, Series Output supports up to 120V, while Parallel Output supports up to 10A. The precision encoder, voltage and current readback, OCP and OVP protection, and 8-Group Memory provide practical control for repeated DC power experiments.
With the choice of a basic front-panel version or a communication-based programmable version, the SPPS605 series offers flexible DC power configurations for compatible electrochemical cell experiments and laboratory research applications.