Click the link above to get the full user guide for this product.
120V Series Output DC Power Source for High
Voltage Relay Coil Testing KUAIQU SPPS605-2KD
60V 5A
High Voltage Series Output DC Power Supply for Relay and Electromagnetic Coil Testing
The SPPS605-2KD Dual Channel DC Power Supply is designed for high-voltage DC relay coil testing, contactor coil evaluation, and electromagnetic control device development. It features two independent 0–60V, 0–5A, 300W output channels, which can be combined through Series Output to provide up to 0–120V, 0–5A, and 600W.
The 120V Series Output configuration makes this power supply suitable for compatible high-voltage DC relay coils and electromagnetic devices that require a higher DC excitation voltage than a single channel can provide. Independent and Parallel Output modes offer additional configurations for different coil voltage and current requirements.
The SPPS605 series also provides precision encoder adjustment, OCP and OVP protection, Output ON/OFF control, and 8-Group Memory. Two versions are available: the SPPS605-2KD basic version without communication-based programmable control and the SPPS605R-2KD programmable version with a communication interface.
Key Features
1. Series Output up to 120V for High Voltage Relay Coils
The Series Output mode combines both channels to provide up to 0–120V, 0–5A, and 600W. This configuration is suitable for compatible DC relay coils and contactor coils with rated voltage requirements above the 60V range of a single channel.
2. Dual Independent Outputs for Two Coil Testing Circuits
Each independent channel provides 0–60V, 0–5A, and up to 300W. Users can establish separate DC excitation conditions for two compatible relay or electromagnetic coil test circuits without combining the channels.
3. Parallel Output for High Current Coil Applications
The Parallel Output mode provides up to 0–60V, 0–10A, and 600W. It offers a higher-current supply configuration for compatible lower-voltage electromagnetic coils and DC loads requiring greater current.
4. Adjustable Voltage and Current for Coil Excitation
The precision encoder allows controlled adjustment of output voltage and current. With 10mV voltage setting resolution and 1mA current setting resolution, users can establish different electrical excitation conditions according to the coil's rated specifications.
5. OCP and OVP Protection
Over Current Protection (OCP) and Over Voltage Protection (OVP) are available in Independent, Series, and Parallel output modes. These functions help reduce the risk of excessive current or voltage conditions during relay coil energization and DC power testing.
6. Output ON/OFF Control for Coil Energization
The Dual Channel, Series, and Parallel modes support Output ON/OFF control. Users can switch the output on or off during coil connection, disconnection, and repeated energization procedures while managing the configured output settings.
7. Negative-to-Zero-to-Positive Voltage Output
The power supply supports Negative Voltage–0–Positive Voltage output mode. This provides a polarity-related DC configuration for compatible electromagnetic coils and devices requiring different excitation polarities.
8. One-Key Series/Parallel Switching
The dedicated Series/Parallel button allows convenient selection between the supported output configurations. The dedicated Series-Parallel Output Port provides a connection point for combined output without complicated external wiring.
9. 8-Group Memory for Different Coil Ratings
The power supply provides eight memory groups:
-
CH1: 2 groups
-
CH2: 2 groups
-
Series Mode: 2 groups
-
Parallel Mode: 2 groups
Voltage and current settings for different compatible coil ratings can be stored and recalled for repeated testing procedures.
10. Panel Lock with Buzzer
The Panel Lock Function helps prevent unintended changes to output settings during testing. The built-in buzzer provides an audible indication during panel operation.
11. Basic and Programmable Version Options
The SPPS605-2KD is the basic version with front-panel operation and 8-Group Memory. The SPPS605R-2KD is the programmable version with a communication interface for compatible communication-based control applications. The interface configuration should be confirmed before ordering.
Applications
High Voltage DC Relay Coil Energization Testing
Provides adjustable DC power for energizing compatible high-voltage relay coils. The Series Output mode provides up to 120V and 5A, allowing engineers to establish higher-voltage DC excitation conditions within the power supply's rated output limits.
DC Contactor Coil Testing
Suitable for supplying adjustable DC power to compatible contactor coils during electrical evaluation. Voltage and current can be adjusted according to the coil's rated electrical specifications during energization and bench inspection.
Electromagnetic Actuator Coil Testing
Provides DC excitation power for compatible electromagnetic actuator coils and solenoid assemblies. Independent and Series output configurations allow users to establish different voltage conditions for different coil designs.
Relay Coil Current and Voltage Evaluation
The adjustable voltage and current outputs allow engineers to establish different coil operating points. The power supply's output voltage and current readback provide information about the electrical input conditions during testing.
High Voltage Coil Series Testing
The 0–120V Series Output configuration provides a higher voltage range for compatible relay coils that require more than 60V DC. The maximum output current in this mode is 5A, with a maximum output power of 600W.
Polarity-Related Electromagnetic Coil Testing
The Negative Voltage–0–Positive Voltage output mode provides an additional configuration for compatible polarized electromagnetic coils. Connection polarity should be selected according to the coil and test circuit specifications.
Dual Relay Coil Comparison Testing
The two independent channels allow engineers to establish separate voltage and current conditions for two compatible relay coils. This supports comparative evaluation of different coil specifications and electrical input requirements.
Repeated Relay and Contactor Coil Inspection
The 8-Group Memory Function allows commonly used settings to be stored and recalled. Combined with Output ON/OFF control, precision encoder adjustment, and Panel Lock, it supports repeated coil testing and production inspection procedures.
Quality Check and Terms of Service:
-
Package includes: DC Power Supply ×1, Output Power Cord ×1, Input Power Cord ×1, User Manual ×1, and Warranty Card ×1.
-
The supplied product information states CE and FCC certification. Please confirm the applicable certificates for the selected version.
-
All DC power supplies and accessories are inspected before shipment.
-
Customer support is available for product configuration and technical questions.
-
Please confirm the relay coil's rated voltage, current, resistance, and polarity before selecting the output mode.
-
The 120V maximum output is available in Series Mode. Each independent channel is rated at 0–60V and 0–5A.
-
For inductive coil loads, use appropriate external discharge or suppression arrangements when required by the coil design and test setup.
-
Please select the appropriate output configuration according to the coil's electrical ratings.
-
Confirm the communication interface configuration when selecting the SPPS605R-2KD programmable version.
Technical Specifications
Output Ratings
| Parameter |
Specification |
| Product Model Options |
SPPS605-2KD Basic Version / SPPS605R-2KD Programmable Version |
| Product Type |
Dual Channel DC Power Supply |
| Independent Output |
0–60V, 0–5A, 300W × 2 |
| Series Output |
0–120V, 0–5A, 600W |
| Parallel Output |
0–60V, 0–10A, 600W |
| USB Output |
5V, 2A |
| Output Modes |
Independent, Series, Parallel |
| Output Control |
Output ON/OFF for Dual Channel, Series, and Parallel Modes |
| Series/Parallel Control |
One-Key Series/Parallel Mode |
| Series/Parallel Output Port |
Dedicated Output Port |
| Output Voltage Mode |
Negative Voltage–0–Positive Voltage |
Setting and Readback Specifications
| Parameter |
Specification |
| Voltage Setting Resolution |
10mV |
| Current Setting Resolution |
1mA |
| Voltage Readback Resolution |
10mV |
| Current Readback Resolution |
1mA |
| Voltage Setting Accuracy |
≤0.01% + 15mV |
| Current Setting Accuracy |
≤0.01% + 10mA |
| Voltage Readback Accuracy |
≤0.01% + 15mV |
| Current Readback Accuracy |
≤0.01% + 10mA |
Regulation and Ripple
| Parameter |
Specification |
| Load Regulation – Voltage |
≤0.3% + 10mV |
| Load Regulation – Current |
≤0.1% + 2.5mA |
| Line Regulation – Voltage |
≤0.01% + 2.5mV |
| Line Regulation – Current |
≤0.1% + 2.5mA |
| Voltage Ripple – Independent Mode |
≤200mVp-p, ≤25mVrms |
| Voltage Ripple – Series/Parallel Mode |
≤300mVp-p, ≤40mVrms |
| Current Ripple – Independent Mode |
≤20mArms |
| Current Ripple – Series/Parallel Mode |
≤35mVrms (as printed in the source specification; unit confirmation recommended) |
| Ripple Measurement Frequency Range |
20Hz–20MHz |
Response and General Specifications
| Parameter |
Specification |
| Rise Time – No Load |
≤200ms |
| Rise Time – Full Load |
≤300ms |
| Fall Time – No Load |
≤20s |
| Fall Time – Full Load |
≤300ms |
| Dynamic Response |
≤200ms |
| Efficiency |
≥85% |
| Input Voltage / Current |
110V / 8A; 220V / 5A |
| Protection Functions |
OCP, OVP |
| Memory Function |
8 Groups |
| Memory Allocation |
CH1: 2 Groups; CH2: 2 Groups; Series: 2 Groups; Parallel: 2 Groups |
| Panel Lock |
Yes, with Buzzer |
| Adjustment |
Precision Encoder Adjustment |
| Rated Operating Temperature |
0°C–40°C |
| Product Dimensions |
Approx. 24 × 12.5 × 13cm |
| Net Weight |
Approx. 2.75kg |
| Package Dimensions |
Approx. 38.5 × 23.5 × 20cm |
| Package Weight |
Approx. 3.4kg |
| Carton Quantity |
4 pcs/carton |
Version and Communication Options
| Version |
Description |
| SPPS605-2KD |
Basic version without communication-based programmable control; supports front-panel operation and 8-Group Memory |
| SPPS605R-2KD |
Programmable version with communication interface |
| Communication Interface Configuration |
USB / RS-232 / RS-485 options; confirm the actual interface configuration before ordering |
Important Notes:
-
The 120V output is the maximum voltage available in Series Mode, not in a single independent channel.
-
Independent Output supports up to 60V and 5A per channel.
-
Series Output is rated at 0–120V, 0–5A, and 600W.
-
Parallel Output is rated at 0–60V, 0–10A, and 600W.
-
The 10mV voltage and 1mA current resolutions are taken from the detailed specification table.
-
Confirm whether the required input version is 110V/8A or 220V/5A before ordering.
-
The Series/Parallel current ripple value is printed as ≤35mVrms in the source image; confirm the unit before publication.
Why Choose the SPPS605 Dual Channel DC Power Supply?
High-voltage DC relay coil testing requires a power source that can establish the rated excitation voltage and current of the coil. For coils requiring more than 60V DC, a higher-voltage output configuration is necessary.
The SPPS605 provides two independent 60V, 5A channels and a Series Output configuration of up to 120V, 5A, and 600W. It also offers Parallel Output up to 10A for compatible lower-voltage, higher-current applications.
With precision encoder adjustment, OCP and OVP protection, Output ON/OFF control, and 8-Group Memory, the power supply supports different relay coil and contactor coil evaluation procedures. Users can select the basic SPPS605-2KD or programmable SPPS605R-2KD according to their required operation and communication configuration.