Click the link above to get the full user guide for this product.
NICE-POWER R-SPS15100 0-100A 0-15V
High-Current DC Power Source for Electrochemical
Process Development
Key Features
100A DC Output for Compatible Electrochemical Setups
The NICE-POWER R-SPS15100-R provides an adjustable DC output from 0–15V, with a maximum output current of 100A and rated output power of 1500W. It can serve as a DC source for compatible electrochemical research setups that require low voltage and high current. Before connecting an electrochemical cell or experimental fixture, verify its required voltage, current, polarity, operating duration, and total power demand against the supply's specifications.
CV/CC Modes for Configuring Experimental Supply Conditions
The R-SPS15100-R supports Constant Voltage (CV) and Constant Current (CC) operating modes, indicated on the front panel. These modes let users configure the supply according to the electrical requirements of a particular experiment. Select the operating mode and output settings based on the experimental procedure and the requirements of the connected electrodes and cell. These functions do not provide automatic electrochemical process control or regulate chemical conditions.
Manual Adjustment for Changing Research Conditions
The front-panel encoder knob allows users to adjust the output settings when preparing an experiment or establishing a different supply condition. The output ON/OFF control helps manage power delivery during fixture preparation, electrode connection checks, and changes to the experimental setup. The unit supports manual output adjustment; it does not provide built-in current ramp programming, automated process timing, or polarity reversal.
Displayed Electrical Readings During Experiments
The four-digit voltage and current display provides visible output readings, while the power display shows output power information during operation. These readings help researchers observe the electrical conditions provided by the source while an experiment is running. They do not directly measure electrode potential, reaction rate, electrolyte concentration, temperature, or other electrochemical properties.
Communication Interfaces for Connected Research Setups
The R-SPS15100-R is equipped with USB, RS-232, and RS-485 communication interfaces, according to the specified model configuration. These interfaces may be useful when connecting the supply to compatible external equipment in a research or development setup. Verify the supported communication protocol and software compatibility before integration. The presence of communication interfaces alone does not guarantee support for automated process control, programmed output profiles, or data acquisition.
Applications
Electrochemical Cell Experimentation
Use the R-SPS15100-R as a DC source for compatible electrochemical cell experiments that require low-voltage, high-current input. Set the supply according to the cell's documented electrical requirements and verify the electrode arrangement, polarity, and permitted operating conditions before applying power. Monitoring chemical reactions and evaluating cell performance require methods and instruments appropriate to the specific experiment.
Electrode System and Experimental Fixture Development
During development of electrode assemblies and experimental fixtures, the R-SPS15100-R can provide DC power to compatible setups within its 0–15V, 100A, and 1500W ratings. Researchers can configure the supply manually while evaluating the experimental arrangement. The required current, contact resistance, conductor capacity, and thermal conditions should be considered when selecting cables, connectors, and fixtures for high-current operation.
Electrochemical Process Condition Evaluation
Process development may involve comparing experimental outcomes under different electrical supply conditions. The R-SPS15100-R allows users to establish selected voltage or current settings manually, within the unit's ratings and the experiment's requirements. Researchers must monitor the process using suitable external instruments and established procedures; the power supply does not independently measure reaction efficiency, chemical composition, deposition rate, or electrode performance.
Electrochemical Research Bench Integration
The R-SPS15100-R can provide DC input power in a research bench that includes an electrochemical cell, electrode fixtures, appropriate wiring, and separate measurement instruments. Its encoder adjustment, CV/CC indicators, and output ON/OFF control support manual configuration during setup and experimental work. Before energizing the arrangement, verify connection polarity, current ratings, grounding, environmental requirements, and the suitability of the supply for the experiment's operating duration.
Quality Check and Terms of Service:
-
Package Includes: DC Power Supply × 1, Output Power Cord × 1, Input Power Cord × 1, User Manual × 1, Warranty Card × 1.
-
Certifications: Has passed CE & FCC Certification.
-
Quality Inspection: All DC power supplies and accessories are inspected before shipment to ensure good quality.
-
Customer Support: Contact us with any questions, and we'll respond within 24 hours.
Technical Specifications
| Parameter |
Specification |
| Model |
R-SPS15100-R |
| Product Type |
High-Current Regulated DC Power Source |
| Rated Output Power |
1500W |
| Output Voltage |
0–15V |
| Output Current |
0–100A |
| Load Regulation — Voltage |
≤0.1% + 10mV |
| Load Regulation — Current |
≤0.1% + 2.5mA |
| Line Regulation — Voltage |
≤0.01% + 2.5mV |
| Line Regulation — Current |
≤0.1% + 2.5mA |
| Voltage Setting Resolution |
10mV |
| Current Setting Resolution |
10mA |
| Voltage Readback Resolution |
10mV |
| Current Readback Resolution |
10mA |
| Voltage Setting Accuracy |
≤0.05% + 10mV |
| Current Setting Accuracy |
≤0.01% + 10mA |
| Voltage Readback Accuracy |
≤0.05% + 10mV |
| Current Readback Accuracy |
≤0.01% + 10mA |
| Voltage Ripple (20Hz–20MHz) |
≤3500mVp-p / ≤1200mVrms |
| Current Ripple (20Hz–20MHz) |
≤200mArms |
| Rise Time, No Load |
≤100ms |
| Rise Time, Full Load |
≤150ms |
| Fall Time, No Load |
≤35s |
| Fall Time, Full Load |
≤50ms |
| Dynamic Response |
≤20ms |
| Efficiency |
≥85% |
| Communication Interfaces |
USB, RS-232, and RS-485 |
| Operating Temperature |
0°C–40°C |
| Approximate Product Dimensions |
33 × 27 × 9cm |
| Approximate Net Weight |
3.7kg |
Why Choose NICE-POWER R-SPS15100-R?
Electrochemical process development can require a controllable DC source for establishing the electrical conditions of a laboratory experiment. The NICE-POWER R-SPS15100-R offers a 0–15V adjustable output, a maximum current of 100A, and rated output power of 1500W for compatible setups within these limits.
Its CV/CC operating modes, front-panel encoder, output ON/OFF control, and displayed voltage, current, and power readings support manual supply configuration during research and experimental development. USB, RS-232, and RS-485 interfaces offer connectivity options for compatible external equipment when communication is required.
Before selecting this model, confirm the experiment's voltage and current requirements, polarity, operating duration, conductor and connector ratings, and overall power demand. Electrochemical systems may also require independent monitoring of temperature, electrolyte conditions, electrode potential, and reaction behavior. The R-SPS15100-R supplies DC power; it does not independently analyze electrochemical reactions or control the complete process. Use suitable external instruments and process-specific procedures for those tasks.
