KUAIQU SPS-C3010S 30V 10A 300W

Regulated DC Power Supply with OCP for

LED Testing

The KUAIQU SPS-C3010S is a 30V 10A 300W Regulated DC Power Supply designed for LED Testing, LED modules, and related lighting electronics. With regulated DC output, OCP, precise voltage and current adjustment, and clear electrical readouts, it provides a controlled power source for evaluating LED devices and testing their operating conditions within the rated range.

Key Features

Regulated DC Output for LED Testing

The SPS-C3010S provides a 0–30V adjustable DC output with up to 10A current and 300W maximum power. This output range allows users to set appropriate supply conditions for compatible LEDs, LED modules, and lighting-related electronic circuits during testing.

OCP Protection for LED Test Circuits

Over-Current Protection (OCP) helps protect the power supply when excessive current conditions occur. This is useful during LED testing, where incorrect settings or abnormal circuit conditions may result in higher-than-expected current.

Fine Voltage and Current Adjustment

The V-COARSE, V-FINE, A-COARSE, and A-FINE controls provide flexible adjustment of output voltage and current. Coarse adjustment allows users to reach the required range quickly, while fine adjustment supports smaller parameter changes when evaluating LED operating conditions.

HD 4-Digit Display for Electrical Parameter Monitoring

The HD 4-Digit Display clearly shows voltage, current, and power readings during operation. Users can observe the electrical parameters supplied to the LED or LED module and compare readings under different test conditions.

Independent Output Button for Safer Test Setup

The Independent Output Button allows the DC output to be activated separately from parameter adjustment. Users can configure the desired voltage and current before enabling the output, making it convenient to prepare LED testing conditions before applying power.

Low-Ripple Output for Consistent Testing

The SPS-C3010S provides regulated DC output with specified voltage ripple of ≤100mVp-p / ≤15mVrms and current ripple of ≤15mArms. Controlled ripple characteristics help provide consistent supply conditions when comparing LED test results.

Multiple Protection Functions

In addition to OCP, the SPS-C3010S includes Over-Voltage Protection, Over-Load Protection, Short Circuit Protection, Over-Temperature Protection, and Grounding Protection. These functions provide additional protection when testing LED devices and related electronic circuits.

USB and Type-C Charging Output

The built-in USB and USB Type-C outputs provide convenient charging for compatible devices used alongside LED testing equipment. The USB/Type-C output supports PDO profiles of 5V/3A, 9V/2A, and 12V/1.5A, as well as PPS output of 3.3V–5.9V/3A and 3.3V–11V/1.6A.

Applications

LED Device Testing

The SPS-C3010S can provide controlled DC power for testing compatible LED devices within its 30V, 10A, and 300W rated output range. Users can adjust the supply conditions according to the requirements of the LED under test.

LED Module Testing

For LED modules and lighting assemblies that operate within the power supply's specifications, the SPS-C3010S provides adjustable DC power while displaying real-time voltage, current, and power values.

LED Operating Condition Evaluation

Different voltage and current settings can be applied to compatible LED devices to observe changes in their electrical operating conditions. The fine adjustment controls make it easier to perform controlled parameter changes during testing.

LED Driver and Lighting Circuit Testing

The SPS-C3010S can serve as a DC source for compatible LED driver circuits and lighting electronics during development and testing. OCP and other protection functions provide additional protection during abnormal operating conditions.

LED Production and Quality Testing

For laboratory and engineering environments, the SPS-C3010S can provide repeatable DC supply conditions for checking compatible LED products and lighting circuits within its rated specifications.

Quality Check and Terms of Service:

Package Includes

Each KUAIQU SPS-C3010S Regulated DC Power Supply is packaged with the standard accessories required for normal operation.

CE & FCC Certification

The SPS-C3010S is designed to meet applicable CE and FCC requirements for its intended use.

Inspection Before Shipment

Each power supply undergoes inspection before shipment to help ensure proper operation and product quality.

Customer Support within 24 Hours

For questions about product operation, specifications, or usage, KUAIQU customer support provides assistance within 24 hours.

Technical Specifications

Why Choose KUAIQU SPS-C3010S?

The KUAIQU SPS-C3010S combines 30V, 10A, and 300W output capability with regulated DC output for LED Testing and related lighting electronics applications. Its OCP function provides additional protection against excessive current conditions, while V-COARSE, V-FINE, A-COARSE, and A-FINE controls allow users to make controlled voltage and current adjustments. The HD 4-Digit Display provides clear voltage, current, and power readings during testing, while the low-ripple output supports consistent test conditions. With OVP, Over-Load, Short Circuit, Over-Temperature, and Grounding Protection also included, the SPS-C3010S provides a practical power source for LED devices, LED modules, and compatible lighting circuits.