KUAIQU SPPS-H3010 Actuator Testing DC

Test Supply AdjustableDC Power Supply

30V 10A with Output ON/OFF Control 

The KUAIQU SPPS-H3010 Actuator Testing DC Test Supply provides adjustable DC power for Actuator Testing, actuator control circuit evaluation, electronic module testing, and laboratory development. With a 30V 10A 300W output, Encoder Knob Adjustment, Output ON/OFF Control, OCP and OVP protection, and real-time voltage, current, and power display, it provides practical control of test power conditions when evaluating compatible DC actuators and actuator-related electronic circuits within its rated output range.

Key Features

Adjustable Voltage and Current for Actuator Testing

The SPPS-H3010 Adjustable DC Power Supply provides an adjustable output from 0-30V and 0-10A, allowing engineers to establish different DC power conditions for compatible actuators and control circuits. The adjustable voltage and current settings are useful when evaluating actuator operation under different supply conditions.

Output ON/OFF Control for Actuator Operation Tests

The dedicated Output ON/OFF Control allows users to switch the DC output on or off while retaining the selected voltage and current settings. This makes it convenient to repeatedly energize and de-energize an actuator during functional checks, troubleshooting, and repeated test procedures.

Encoder Knob Adjustment for Controlled Power Settings

The encoder knob provides convenient adjustment of voltage and current during Actuator Testing. With 10mV voltage setting resolution and 1mA current setting resolution, engineers can make controlled changes to the test power settings when evaluating actuator-related electrical behavior.

10A Current Capacity for Compatible Actuator Loads

The SPPS-H3010 provides up to 10A adjustable current and 300W rated power, offering practical power capacity for compatible DC actuators and related circuits within its specifications. The current setting can be adjusted according to the requirements of the connected test device.

OCP Protection for Actuator Load Testing

Built-in Over Current Protection (OCP) helps provide additional protection when an actuator or connected test circuit draws excessive current. This can be useful during actuator testing where changes in operating conditions or abnormal load conditions may cause increased current demand.

OVP Protection for Controlled Test Conditions

Built-in Over Voltage Protection (OVP) helps provide additional protection against abnormal over-voltage conditions. This is useful when adjusting the DC output during actuator and control circuit testing, particularly when connected electronic components require controlled supply conditions.

Real-Time Voltage, Current and Power Monitoring

The display provides real-time information for:

• Output Voltage (V)

• Output Current (A)

• Output Power (W)

Engineers can monitor the electrical conditions of a compatible actuator and observe changes in power consumption while different voltage and current conditions are applied during testing.

USB 5V/2A Output for Auxiliary Equipment

The integrated USB 5V/2A output provides a convenient auxiliary power source for compatible USB-powered equipment used around an actuator testing setup. It provides additional power access without changing the main DC output settings used for the test device.

Applications

DC Actuator Functional Testing

The KUAIQU SPPS-H3010 can provide adjustable DC power for evaluating compatible DC actuators within its 0-30V, 0-10A, and 300W ratings. Engineers can adjust the supply conditions and monitor voltage, current, and power during actuator operation.

Actuator Control Circuit Testing

The Actuator Testing DC Test Supply can be used to provide controlled DC power when evaluating compatible actuator control circuits and electronic modules. Encoder Knob Adjustment allows convenient changes to voltage and current settings during circuit evaluation.

Actuator Load and Current Testing

The adjustable 0-10A current range provides practical control when evaluating the current requirements of compatible actuator loads. Real-time current and power readings help engineers observe electrical demand while the actuator is operating under different test conditions.

Repeated Actuator Operation Testing

The Output ON/OFF Control makes repeated actuator energizing and de-energizing more convenient while retaining the configured output settings. This is useful for repeated functional checks, troubleshooting, and development testing where the actuator needs to be powered through multiple test cycles.

Quality Check and Terms of Service:

Each KUAIQU SPPS-H3010 Actuator Testing DC Test Supply is inspected before shipment to help ensure reliable operation and consistent product quality.

Package Includes:

• 1 × SPPS-H3010 DC Bench Power Supply

• 1 × Output Test Lead

• 1 × AC Power Cord

• 1 × User Manual

• 1 × Warranty Card

Quality Assurance:

• CE & FCC Certification

• Inspection before shipment

• Customer support within 24 hours

Technical Specifications

Why Choose KUAIQU SPPS-H3010?

The KUAIQU SPPS-H3010 Actuator Testing DC Test Supply combines 0-30V adjustable voltage, 0-10A adjustable current, and 300W power capacity for practical Actuator Testing. Its Encoder Knob Adjustment provides convenient control when establishing different test power conditions, while the real-time voltage, current, and power display helps engineers monitor electrical demand during actuator operation.

With Output ON/OFF Control, OCP, and OVP protection, the SPPS-H3010 supports convenient and controlled testing of compatible DC actuators and actuator-related electronic circuits. It is a practical Adjustable DC Power Supply for actuator functional testing, load and current evaluation, control circuit testing, troubleshooting, and repeated operation tests where adjustable DC power is required.