Click the link above to get the full user guide for this product.

KUAIQU Industrial DC Power Supply
R-SPS6040S 60V 40A 2400W with OVP for
Electroplating Power Supply Testing
Key Features
0-60V Adjustable Output for Electroplating Test Conditions
The R-SPS6040S provides a 0-60V adjustable DC output, allowing engineers to establish different DC voltage conditions when evaluating electroplating power supply systems and related equipment. The adjustable range provides flexibility when testing equipment that operates at different voltage levels.
0-40A Output for High-Current Electroplating Tests
With up to 40A output current and 2400W rated power, the R-SPS6040S provides substantial DC output capacity for compatible electroplating test setups. The high-current capability is useful when the test equipment requires more electrical power than a standard laboratory power supply can provide.
Direct Voltage, Current and Power Monitoring
The built-in 4-digit display shows output voltage, current, and power during operation. This allows engineers to observe the electrical conditions of the test setup directly and compare power requirements when different electroplating test conditions are applied.
Precision Encoder for Fine Output Adjustment
The precision encoder adjustment provides convenient control over voltage and current settings. During electroplating power supply testing, engineers can make controlled changes to the output and observe how the connected equipment responds to different electrical conditions.
OVP Protection for Voltage-Controlled Testing
Built-in Over Voltage Protection (OVP) helps protect the connected test equipment when an excessive voltage condition occurs. This provides an additional protection layer when establishing and changing voltage conditions during electroplating equipment evaluation.
OCP for Higher-Current Test Conditions
The integrated Over Current Protection (OCP) helps protect the output when current exceeds the configured protection condition. This is particularly useful for test setups where current demand can change during operation.
Output ON/OFF for Convenient Test Operation
The Output ON/OFF control allows the DC output to be applied or removed without repeatedly configuring the voltage and current settings. It is useful when performing test start, stop, and repeated operating procedures on electroplating-related equipment.
M1-M4 Memory for Repeated Test Settings
The M1-M4 four-group Memory Function allows frequently used voltage and current settings to be stored. When several established test conditions need to be repeated, stored settings can make the test preparation process more efficient.
Panel Lock for Stable Test Parameters
The Panel Lock function helps prevent accidental changes to the configured parameters during testing. Once the required voltage and current settings have been established, the panel can be locked to help maintain consistent test conditions.
Rear High-Current Output for Electroplating Test Equipment
The R-SPS6040S provides a rear high-current output for applications requiring greater current capacity. For electroplating test setups using higher current within the 40A rated output, the rear connection provides a practical connection option.
USB, RS232 and RS485 Interfaces
The R-SPS6040S includes USB, RS232 and RS485 interfaces, providing connection options when the Industrial DC Power Supply is used in an engineering or laboratory test environment.
Applications
Electroplating Power Supply Testing
The R-SPS6040S can provide adjustable DC power for evaluating compatible electroplating power supply equipment under different voltage and current conditions.
Electroplating Equipment Evaluation
The 0-60V and 0-40A output range provides flexibility for testing compatible electroplating-related equipment that requires adjustable DC input power.
High-Current Electroplating Test Setup
The 2400W power rating and 40A maximum output provide higher current capacity for compatible electroplating test setups where a standard bench power supply may not provide sufficient output.
Electroplating Power Condition Testing
Engineers can adjust the voltage and current settings while monitoring actual voltage, current, and power on the display. This makes it possible to compare electrical behavior under different test conditions.
Electroplating Equipment Start and Stop Testing
The Output ON/OFF function provides convenient control of the DC output during repeated startup, shutdown, and operating tests.
Repeated Electroplating Test Procedures
The M1-M4 Memory Function can store commonly used test settings, making repeated testing more convenient when the same voltage and current conditions are used multiple times.
Quality Check and Terms of Service:
-
Package Includes: DC Power Supply ×1, Output Power Cord ×1, Input Power Cord ×1, User Manual ×1, Warranty Card ×1
-
CE & FCC Certification: The product has passed CE and FCC certification requirements.
-
Inspection Before Shipment: The DC power supply and included accessories are inspected before shipment to help ensure product quality.
-
Customer Support: Contact us with any questions, and our customer support team will respond within 24 hours.
Technical Specifications
| Parameter |
R-SPS6040S |
| Product Type |
High Power Adjustable DC Power Supply |
| Rated Voltage |
0-60V |
| Rated Current |
0-40A |
| Rated Power |
2400W |
| Operating Temperature |
0°C-40°C |
| Load Regulation, Voltage |
≤0.1% + 10mV |
| Load Regulation, Current |
≤0.1% + 2.5mA |
| Line Regulation, Voltage |
≤0.01% + 2.5mV |
| Line Regulation, Current |
≤0.1% + 2.5mA |
| Setting Resolution, Voltage |
10mV |
| Setting Resolution, Current |
10mA |
| Readback Resolution, Voltage |
10mV |
| Readback Resolution, Current |
10mA |
| Setting Accuracy, Voltage |
≤0.05% + 10mV |
| Setting Accuracy, Current |
≤0.01% + 10mA |
| Readback Accuracy, Voltage |
≤0.05% + 10mV |
| Readback Accuracy, Current |
≤0.01% + 10mA |
| Voltage Ripple |
≤400mVp-p / ≤60mVrms |
| Current Ripple |
≤20mArms |
| Rise Time, No Load |
≤100ms |
| Rise Time, Full Load |
≤150ms |
| Fall Time, No Load |
≤15s |
| Fall Time, Full Load |
≤50ms |
| Dynamic Response Time |
≤20ms |
| Efficiency |
≥85% |
| Display |
4-Digit Voltage, Current and Power Display |
| Memory Function |
M1-M4, 4 Groups |
| Protection |
OCP, OVP |
| Output Control |
Output ON/OFF |
| Interfaces |
USB, RS232, RS485 |
| Size |
Approx. 35 × 27 × 10cm |
| Net Weight |
Approx. 4.6kg |
Why Choose KUAIQU R-SPS6040S?
The KUAIQU Industrial DC Power Supply R-SPS6040S provides 0-60V adjustable output, up to 40A current, and 2400W power, making it suitable for compatible high-current electroplating power supply and equipment testing.
Its precision encoder adjustment makes it convenient to establish different test conditions, while the 4-digit voltage, current, and power display provides direct visibility into the electrical output. OCP and OVP add protection during testing, while Output ON/OFF and Panel Lock help maintain controlled operation.
For repeated evaluation, the M1-M4 Memory Function allows frequently used settings to be stored and recalled. Combined with the rear high-current output and USB, RS232 and RS485 interfaces, the R-SPS6040S provides a practical Industrial DC Power Supply for Electroplating Power Supply Testing, high-current electroplating test setups, equipment evaluation, and repeated electrical testing within its rated output range.