High-Current DC Bench Power Supply for Circuit

Board Debugging, NICE-POWER R-SPS1560, 15V

60A 900W

The NICE-POWER R-SPS1560 High Power Basic Series is an adjustable DC bench power supply designed for compatible high-current circuit board debugging, electronics development, and DC power testing. With an adjustable output range of 0–15V, a maximum output current of 60A, and a rated output power of 900W, it provides a DC power source for circuit boards, power electronics assemblies, and electronic prototypes that operate within the power supply's rated specifications.

During circuit board debugging, engineers and technicians need to supply the required DC voltage while observing the circuit's power consumption and checking its operation. The R-SPS1560 features four-digit voltage and current displays, a power display, an encoder adjustment knob, and Output ON/OFF control to support routine bench power-up, circuit inspection, and troubleshooting.

The series includes two models: the R-SPS1560 standard version and the R-SPS1560-R programmable version. USB, RS-232, and RS-485 communication interfaces are optional configurations, not standard features. Please confirm the selected model and interface requirements before ordering.

Before connecting a circuit board, check its specified input voltage, expected current consumption, polarity, and maximum power requirements. Although the R-SPS1560 supports output current up to 60A, this does not mean every connected board should receive that current. Set the output voltage and current limit appropriately for the circuit under test, and use suitable external measurement instruments when more detailed electrical analysis is required.

Key Features

Adjustable 0–15V DC Output for Circuit Board Debugging

The R-SPS1560 provides an adjustable 0–15V DC output for compatible circuit board debugging and electronics development. Users can adjust the output voltage to match the specified input requirements of the circuit under test, making it suitable for powering compatible low-voltage boards, electronic assemblies, and prototypes during bench evaluation.

High-Current Output up to 60A and 900W Rated Power

With a maximum output current of 60A and a rated output power of 900W, this high-current DC bench power supply is suitable for compatible low-voltage, high-current electronic circuits and power electronics assemblies. Before powering a board, verify its voltage, current, and power requirements. The maximum rated output is a supply capacity, not a recommended current setting for every circuit.

Four-Digit Voltage and Current Displays with Power Display

The built-in four-digit voltage and current displays, together with the power display, help users observe the displayed output readings during circuit board debugging. These readouts are useful when checking power consumption, comparing operating conditions, and troubleshooting electronic assemblies. Use a suitable multimeter, oscilloscope, or other external instrument when measurements beyond the power supply's built-in readouts are required.

Output ON/OFF Control for Bench Testing

The Output ON/OFF function allows users to enable or disable the DC output during routine testing. It is useful when preparing connections, beginning a test, or stopping power delivery while troubleshooting a circuit. This function is an output control feature and should not be interpreted as a dedicated short-circuit protection or overcurrent protection system.

Encoder Knob for Convenient Output Adjustment

The encoder adjustment knob provides a convenient way to adjust the power supply's output settings. During circuit board debugging, users can change the output voltage as required by the test procedure and observe the displayed voltage, current, and power readings. Always follow the circuit's rated input specifications when changing the supply settings.

Standard and Programmable Versions

The R-SPS1560 is the standard version, while the R-SPS1560-R is the programmable version. USB, RS-232, and RS-485 communication interfaces are optional for the programmable version and are not standard on every unit. Confirm the selected configuration and available interface options if your application requires communication with external equipment.

Front and Rear Output Ports

The R-SPS1560 provides front-panel and rear-panel output ports for different bench connection requirements. The front-panel output current is limited to less than 5A, while the rear-panel output supports full-rated-power operation. For high-current circuit board debugging, use the appropriate rear-panel output connection, suitable cables, and connections that comply with the product's specifications.

Applications

High-Current Circuit Board Debugging

Use the NICE-POWER R-SPS1560 as a DC bench power supply for compatible circuit boards that require low voltage and higher current. Its adjustable 0–15V output and voltage, current, and power displays support routine power-up checks and observation of a board's power consumption during troubleshooting.

PCB Power-Up and Prototype Testing

During PCB bring-up, engineers can use the R-SPS1560 to supply DC input power to compatible prototypes and electronic assemblies. Adjust the output according to the board's design specifications, then observe the displayed output readings while checking circuit operation. Inspect the board for shorts, verify polarity, and establish appropriate current limits before applying power.

Power Electronics Board Debugging

The R-SPS1560 can provide DC input power to compatible power electronics boards and low-voltage, high-current circuit assemblies. It can be used during bench debugging to check whether a board receives the intended input supply and to observe changes in displayed voltage, current, and power readings. Detailed waveform, switching, or transient analysis requires suitable external test instruments.

Electronic Assembly Testing and Troubleshooting

For electronic assemblies that operate within the 0–15V, 60A maximum-current, and 900W rated-power limits, the R-SPS1560 provides adjustable DC input power for troubleshooting and functional checks. Users can adjust the output, control power delivery using Output ON/OFF, and observe the built-in readouts while investigating circuit behavior.

Quality Check and Terms of Service:

• Package includes: DC Power Supply × 1, Output Power Cord × 1, Input Power Cord × 1, User Manual × 1, Warranty Card × 1.

• Has passed CE & FCC Certification.

• All DC power supplies and accessories are inspected before shipment to ensure good quality.

• Customer support: Contact us with any questions, and we'll respond within 24 hours.

Technical Specifications

Why Choose NICE-POWER R-SPS1560?

The NICE-POWER R-SPS1560 combines adjustable 0–15V DC output, up to 60A output current, and 900W rated power for compatible high-current circuit board debugging and electronics development. Its voltage, current, and power displays, encoder adjustment knob, and Output ON/OFF control provide practical functions for routine bench power-up and troubleshooting.

For engineers and technicians looking for a high-current DC bench power supply for circuit board debugging, the R-SPS1560 offers adjustable DC power for compatible electronic boards, power electronics assemblies, and prototypes. Choose the R-SPS1560 standard version for routine bench power applications or the R-SPS1560-R programmable version when the programmable configuration is needed. Optional communication interfaces must be confirmed when ordering.

Before use, verify the circuit's required input voltage, expected current draw, polarity, and power consumption. For high-current applications, use the rear-panel output and appropriately rated cables. The R-SPS1560 is a DC power supply for powering and observing compatible circuits; it does not replace dedicated instruments for waveform analysis, automated testing, or detailed circuit measurements.