Click the link above to get the full user guide for this product.
Analog Signal Conditioning Board Testing with
R-SPS1005 Regulated DC Supply 0-100V 0-5A 500W
Key Features
Adjustable 0–100V DC Supply for Analog Board Power-Up
The NICE-POWER R-SPS1005 Regulated DC Supply provides an adjustable output voltage from 0 to 100V, with a maximum output current of 5A and rated output power of 500W. For Analog Signal Conditioning Board Testing, engineers can set the DC supply voltage according to the board's rated input requirements before powering up a prototype or assembled circuit. This helps establish a controlled power source for initial board checks and development work.
500W Output for Signal Conditioning Circuit Development
With a rated output power of 500W, the R-SPS1005 can power compatible analog signal conditioning boards and related circuit modules within its voltage, current, and power limits. Typical bench tasks include powering sensor interface circuits, analog amplifier stages, and signal conditioning modules during prototype development. The connected device's input requirements must be checked before use.
CV/CC Operation for Controlled Board Powering
The power supply supports constant-voltage (CV) and constant-current (CC) operation, with automatic switching according to output and load conditions. CV operation is suitable when the circuit requires a specified DC supply voltage. CC operation can limit the output current under applicable load conditions, helping engineers manage power delivery while investigating unexpected current demand. These functions do not replace dedicated overvoltage protection, signal analysis, or circuit diagnostic equipment.
Voltage, Current, and Power Display for Output Monitoring
The four-digit display presents output voltage and current readings, with power also displayed. During Analog Signal Conditioning Board Testing, engineers can monitor the power supply's output while applying the required DC input to the board. These readings describe the supply output; they do not directly measure sensor signals, amplifier gain, signal noise, or filter response.
Front-Panel Adjustment and Output ON/OFF Control
The encoder knob allows convenient front-panel adjustment of the output settings, while the output ON/OFF control allows the DC output to be enabled or disabled as needed. This is useful when preparing a board for power-up, changing the supply setting between test steps, or switching off the output before modifying wiring or circuit connections.
Front and Rear Output Terminals for Bench Testing
The R-SPS1005 includes front and rear output terminals to accommodate different bench connection arrangements. The front output terminal is intended for currents below 5A, while the rear terminals can be used for full-power output with appropriate wiring and connections. Select the output terminals according to the required current and the manufacturer's connection instructions.
Applications
Sensor Signal Conditioning Board Power-Up Testing
Provide DC power to compatible sensor signal conditioning boards during prototype assembly and initial power-up. Engineers can set the required supply voltage and observe the power supply's output readings while checking whether the board starts up under the intended power conditions. Sensor output voltage, accuracy, and response must be checked with suitable measurement instruments.
Analog Amplifier and Filter Board Development
Power analog amplifier boards, active filter circuits, and related signal conditioning stages during laboratory development. The adjustable DC supply helps engineers apply the specified operating voltage while testing the assembled board. Gain, bandwidth, cutoff frequency, distortion, and noise require separate signal-generation and measurement equipment.
Analog Input Interface Board Verification
Supply DC power to analog input interface boards used in measurement equipment, data acquisition systems, and industrial control interfaces. The R-SPS1005 can support board-level power checks during development and troubleshooting. It supplies DC power to the circuit and does not generate, process, or analyze the board's analog input signals.
Industrial Signal Conditioning Module Troubleshooting
Use the regulated DC supply when investigating power-related issues in compatible industrial signal conditioning modules. Engineers can apply the required input voltage and monitor the supply's output current and power readings during troubleshooting. Unexpected readings can indicate that further inspection is needed, but they do not independently identify a failed component or determine the condition of the signal path.
Analog Circuit Prototype Evaluation
Power newly assembled analog conditioning circuits during design iterations, laboratory experiments, and board validation. The adjustable output provides a convenient DC source when the test plan requires different supply-voltage settings within the product's rated limits. Confirm the prototype's input-voltage range, polarity, grounding requirements, and expected current before applying power.
Quality Check and Terms of Service:
-
Package Includes: DC Power Supply × 1, Output Power Cord × 1, Input Power Cord × 1, User Manual × 1, Warranty Card × 1.
-
Certifications: Has passed CE & FCC Certification.
-
Quality Inspection: All DC power supplies and accessories are inspected before shipment to ensure good quality.
-
Customer Support: Contact us with any questions, and we'll respond within 24 hours.
Technical Specifications
| Parameter |
Specification |
| Model |
R-SPS1005 / R-SPS1005-R |
| Product Type |
Regulated DC Power Supply |
| Rated Output Power |
500W |
| Output Voltage Range |
0–100V |
| Output Current Range |
0–5A |
| Operating Mode |
Constant Voltage (CV) / Constant Current (CC) |
| Load Regulation (Voltage) |
≤0.1% + 10mV |
| Load Regulation (Current) |
≤0.1% + 2.5mA |
| Line Regulation (Voltage) |
≤0.01% + 2.5mV |
| Line Regulation (Current) |
≤0.1% + 2.5mA |
| Voltage Setting Resolution |
10mV |
| Current Setting Resolution |
10mA |
| Voltage Readback Resolution |
10mV |
| Current Readback Resolution |
10mA |
| Voltage Setting Accuracy |
≤0.05% + 10mV |
| Current Setting Accuracy |
≤0.01% + 10mA |
| Voltage Readback Accuracy |
≤0.05% + 10mV |
| Current Readback Accuracy |
≤0.01% + 10mA |
| Voltage Ripple (Peak-to-Peak) |
≤200mVp-p |
| Voltage Ripple (RMS) |
≤20mVrms |
| Current Ripple |
≤20mArms (20Hz–20MHz) |
| Rise Time (No Load) |
≤150ms |
| Rise Time (Full Load) |
≤200ms |
| Fall Time (No Load) |
≤15s |
| Fall Time (Full Load) |
≤50ms |
| Dynamic Response Time |
≤20ms |
| Conversion Efficiency |
≥85% |
| Display |
Four-digit voltage/current display with power display |
| Output Control |
Output ON/OFF |
| Adjustment Method |
Encoder knob adjustment |
| Output Terminals |
Front and rear output terminals |
| Front Output Terminal Use |
Output current below 5A |
| Rear Output Terminal Use |
Available for full-power output with suitable wiring and connections |
| Communication Interfaces |
Optional; verify the selected model and configuration |
| Operating Temperature |
0°C–40°C |
| Product Dimensions |
Approx. 26.5 × 18.5 × 8cm |
| Net Weight |
Approx. 2.8kg |
Why Choose NICE-POWER R-SPS1005 for Analog Signal Conditioning Board Testing?
The NICE-POWER R-SPS1005 Regulated DC Supply combines a 0–100V adjustable output, 5A maximum output current, and 500W rated output power for laboratory and engineering applications. Its CV/CC operation, output voltage and current readings, power display, and front-panel controls support practical DC power delivery during analog signal conditioning board development.
For engineers working with sensor interfaces, analog amplifiers, filter circuits, and industrial signal conditioning modules, this regulated DC supply provides a configurable power source for board-level testing and troubleshooting. It is intended for supplying DC power—not for directly measuring or analyzing analog signals—so dedicated test instruments should be used when evaluating signal quality and circuit performance.
Model Configuration Note: R-SPS1005 is the standard manual-adjustment version. R-SPS1005-R is the programmable version. USB, RS232, and RS485 communication interfaces are optional; confirm the actual configuration before ordering and do not assume these interfaces are included as standard.
